Siemens 6SL32020AE161CA0, EAN: 4042948665374

Siemens 6SL3202-0AE16-1CA0 frequency converter 3AC 380V–480V

Industrial Material > Automation > Frequency converter, soft starter

Siemens 6SL3202-0AE16-1CA0 frequency converter 3AC 380V–480V

Lieske Part No. 1337347
Mfg Part No 6SL32020AE161CA0
EAN-Code 4042948665374
Manufacturer Siemens
Here only 169,77 EUR
202,03 EUR incl. VAT

Further information for Siemens 6SL3202-0AE16-1CA0 frequency converter 3AC 380V–480V

General
Product typeOutput choke
CompatibilitySINAMICS G120, SINAMICS G120C, Powermodule FSA1
Operating voltage380 V
Nominal current6,1 A
Type of current3AC
FunctionReduction of voltage rise rate (du/dt) and current peaks
Mounting noteas close as possible to the power module
The Siemens output choke type 6SL3202-0AE16-1CA0 is an electrical component for use in drive systems with modular frequency converters of the SINAMICS G120 series as well as the compact converter SINAMICS G120C. It serves as an output choke and is specifically designed for power modules of the FSA1 group, which are designed for an operating voltage of 380 V to 480 V and a rated current of 6.1 A. The choke is used in industrial applications to optimize the electrical characteristics of drive lines and reduce the load on motors and cables.

Applications

The output choke is used in plants where the voltage steepness (du/dt) and the magnitude of current peaks in the drive system must be minimized. This is particularly important with longer motor cables, as high voltage rises can lead to increased wear on motors and insulation materials. The choke also enables the connection of motor cables with greater lengths without critical electrical loads occurring. It is therefore suitable for plants in the manufacturing industry, packaging industry, or machine building industry, where high demands are placed on the reliability and service life of drives.

Functions and Equipment in Detail

The choke reduces the voltage steepness caused by the rapid switching operations in the frequency converter. This protects the motor windings from excessive stress and extends the motor's service life. Additionally, it dampens the magnitude of current peaks that can occur during motor control, reducing the load on the wiring and the entire drive system. The choke is designed for use in 3-phase AC systems (3AC) and adapts to the electrical parameters of the connected power modules.

Technology Explained Simply

The output choke operates as an inductive resistance in the circuit between the frequency converter and the drive motor. It stores energy in a magnetic field when the current increases and releases this energy when the current decreases. This reduces the rate of change of current (di/dt) and voltage (du/dt). This property is particularly important when longer cables are installed between the converter and the motor, as reflections at the cable ends could otherwise cause voltage peaks. The choke thus serves as a protective measure against electromagnetic compatibility issues and increases the stability of the drive system.

Compatibility and Accessories

The choke is specifically developed for power modules of the FSA1 group, which are used in the SINAMICS G120 and SINAMICS G120C frequency converters. It is not intended for other module types or other Siemens frequency converter families. Use with other modules may result in unexpected operating behavior or damage.

Mounting and Installation

The output choke should be mounted as close as possible to the power module to keep the length of the wiring between the converter and the choke as short as possible. This minimizes the inductance of the connecting lines and maximizes the effectiveness of the choke. Mounting typically occurs on the front side of the converter or in immediate proximity, with electrical connections made according to the manufacturer's technical specifications. Installation requires knowledge of electrical engineering and should be carried out by qualified personnel.

Advantages in Operation

By reducing voltage steepness and current peaks, the service life of the connected motors is increased. Additionally, the likelihood of insulation faults and cable damage is reduced. The choke also allows greater flexibility in cabling, as longer motor cables can be operated without additional measures. This reduces planning and installation effort during plant configuration.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1337347
qrcode für Siemens 6SL3202-0AE16-1CA0 frequency converter 3AC 380V–480V