Software on DL-DVD: STARTER commissioning tool for SINAMICS and MICROMASTER Version V5.6 HF1 DL-DVD in German, English, Spanish, French and Italian also contains all approved SINAMICS SSPs Engineering software SINAMICS commissioning tool STARTER for the SINAMICS S120 converter system. The easy-to-use STARTER commissioning tool is used for commissioning, optimization and diagnostics. This software can be operated as a standalone PC application or integrated in SIMATIC STEP 7 in accordance with TIA, or highly integrated in the SCOUT engineering system (for SIMOTION); the basic functionality and handling is independent of this. In addition to SINAMICS drives, STARTER also supports MICROMASTER 4 devices. In addition, the drives are created in a structured way in the project tree using the project assistant. Beginners are supported by solution-oriented dialog guidance, with a consistent graphic display promoting easy understanding when parameterizing the drive. It should also be noted that the initial commissioning is carried out with the help of a wizard that makes all the basic settings in the drive. This ensures that with just a few setting parameters, the drive is configured to the extent that the motor can already rotate. Any individual settings that may be required are made using graphical parameter masks that visualize the functionality of the drive very precisely. The use of the terminals, the bus connection, the setpoint channel (e.g. fixed setpoints), the speed control (e.g. ramp-function generator, limits), the BICO connections and the diagnostics are individually set, among other things. The advantage is that experts can access individual parameters quickly and specifically at any time via the expert list. An individual compilation of frequently used parameters can be saved in separate user lists and watch tables. The STARTER commissioning tool is available in German, English, French, Italian and Spanish. Depending on the design of the control unit, communication between the control unit (CU) of the drive device and the programming device (PG) or PC can take place via PROFIBUS or PROFINET/Ethernet or via a serial interface. For this purpose, either the SIMATIC S7 connection cable, the CP 5711 communication module or the SIMATIC DP connecting cable are available for the respective drive system. SINAMICS - the integrated drive family for every application area.