Features
Embedded options available	No
Thermal Monitoring Technologies	Yes
PCI Express slots version	3.0
Idle States	Yes
Thermal Design Power (TDP)	145 W
Execute Disable Bit	Yes
Memory
Memory clock speeds supported by processor	1600,1866,2133 MHz
Memory bandwidth supported by processor (max)	68 GB/s
Memory channels supported by processor	Quad
ECC supported by processor	Yes
Maximum internal memory supported by processor	768 GB
Memory types supported by processor	DDR4-SDRAM
Power
VID Voltage Range	0.65 - 1.30 V
Processor
Processor frequency	2.6 GHz
Processor boost frequency	3.6 GHz
Processor cache	35 MB
Processor operating modes	64-bit
Processor cores	14
Number of QPI links	2
Processor cache type	L3
Processor model	E5-2697V3
Processor socket	LGA 2011-v3
System bus rate	9.6 GT/s
Component for	Server/Workstation
Processor threads	28
Processor family	Intel Xeon E5 v3
Bus type	QPI
Processor lithography	22 nm
Other features
Intel	VT-d,VT-x
Operational conditions
Tcase	76.7
Processor special features
Intel Virtualization Technology for Directed I/O (	Yes
Intel	Yes
Intel Trusted Execution Technology	Yes
Intel TSX-NI	No
Intel Virtualization Technology (VT-x)	Yes
Enhanced Intel SpeedStep Technology	Yes
Intel VT-x with Extended Page Tables (EPT)	Yes
Intel Demand Based Switching	Yes
Graphics
On-board graphics adapter	No

Single cable cable pre-assembled 4G0.75+2x0.5+4x0.2 C connector SPEED-CONNECT M17 wires with wire sleeve data cable with IX connector UL/CSA DESINA MOTION-CONNECT 500 Dmax.=10.5 MM, length (M)= One Cable Connection (OCC) MOTION-CONNECT the simple, fast and safe connection for the SINAMICS S210 servo converter and the SIMOTICS S-1FK2 servo motor. The servo motor and the servo converter are connected to one another with just one cable instead of the usual two or three cables. With this single-cable technology with SPEED-CONNECT quick-release fastener, power, encoder connection and brake control are combined in one cable. This results in a number of advantages, e.g. the time-saving laying of just one cable and the smaller installation space or space required for cable routing. Another advantage is that only one cable needs to be cleaned, especially in industries where there are increased hygiene requirements. The cable can also be ordered to the nearest decimetre and has an M17 or M12 connector on the motor side (the smallest OCC connector in the world). The compact motor with a small, rotatable connector enables easy installation even in confined spaces. The cable has protection class IP20 on the converter side and protection class IP65 on the motor side. Optimized connection technology thanks to OCC (One Cable Connection)