Further information for Siemens 6ES7972-0BB70-0XA0 PROFIBUS connector
General
Degree of protection
IP20
Data transfer rate
9.6 kbit/s to 12 Mbit/s
Cable exit
90°
Connection technology
cutting clamp technology Fast-Connect
Operation temperature
-25 to +60 °C
Storage and transport temperature
-40 to +70 °C
Connection for PROFIBUS cable
2
Connection for network components
1
Connection type for network components
9-pin Sub-D connector
PG connector
RoHS compliant
UL approval
The Siemens SIMATIC DP connector, type 6ES7972-0BB70-0XA0, is a PROFIBUS bus connector for connecting PROFIBUS nodes to the bus line. It is specifically designed for use in industrial automation systems where reliable and fast data transmission is required. The connector enables a data transfer rate of up to 12 MBit/s and is therefore suitable for applications requiring high bandwidth and short cycle times. The construction with a 90° cable exit ensures compact mounting on devices and prevents unnecessary strain in the cable routing.
Applications
This connector is used in industrial control systems, particularly in environments where PROFIBUS DP is used as the fieldbus standard. It is suitable for connecting PLC systems, frequency converters, sensors, and other field devices to the bus line. The operating temperature range is from -25 °C to +60 °C, making it suitable for use in production plants, manufacturing halls, and other industrial environments. Storage and transport temperatures range from -40 °C to +70 °C.
Functions and Features in Detail
The connector features a quick-connect terminal block design with a cutting clamp technology, enabling fast and secure connection of PROFIBUS cables. The integrated insulated displacement connectors are designed for 2-wire PROFIBUS cables and ensure a stable electrical connection without additional tools. For connecting to network components or end devices, a 9-pin Sub-D connector, referred to as a PG socket, is integrated. This socket is used for programming and diagnosing connected devices via programming devices (PG).
Technical Explanation
The integrated termination resistor technology allows selection of a termination resistor via a slide switch, simplifying bus termination configuration. This is particularly important to avoid reflections on the bus and ensure signal quality. The mechanical construction is made of plastic, with the housing having a protection rating of IP20. This means the connector is protected against contact with fingers but is not suitable for outdoor use or in damp environments. Dimensions are 15.8 mm (width) × 72.2 mm (height) × 36.4 mm (depth), enabling compact mounting on devices. The net weight is 10 g.
Compatibility and Accessories
The connector is specifically designed for PROFIBUS systems and is compatible with SIMATIC DP systems. It can be combined with other PROFIBUS components, such as connector 6ES7972-0BA52-0XB0 or 6ES7972-0BB52-0XB0, which are also designed for PROFIBUS up to 12 MBit/s. These accessories allow flexible adaptation to different mounting conditions and cable routing.
Mounting and Installation
Mounting is done via a screw locking mechanism, ensuring secure fastening to the device. The 90° cable exit direction reduces mechanical stress on the cables and facilitates placement in tight mounting areas. Connection of the PROFIBUS cable is made via the integrated insulated displacement connectors, requiring no additional tools. The PG socket allows direct connection of a programming device for configuration and diagnostics.
Operational Advantages
The use of this connector provides reliable and fast data transmission in the PROFIBUS network. The fast-connect technology reduces installation time and minimizes errors during cabling. The integrated termination resistor technology ensures stable signal transmission, preventing failures caused by signal reflections. The IP20 protection rating and operating temperature range make the connector suitable for industrial environments without requiring special protective measures.