Siemens 6ES79720BB120XA0, EAN: 4025515067085

Siemens 6ES79720BB120XA0 Profibus PG 90 Connector

Industrial Material > Automation > PLC Systems

Siemens 6ES79720BB120XA0 Profibus PG 90 Connector

Lieske Part No. 391170
Mfg Part No 6ES79720BB120XA0
EAN-Code 4025515067085
Manufacturer Siemens
Here only 73,94 EUR
87,99 EUR incl. VAT

Further information for Siemens 6ES79720BB120XA0 Profibus PG 90 Connector

General
Product typeConnector plug
SystemSIMATIC DP
Bus standardPROFIBUS
Maximum data rate12 Mbit/s
Cable exit90°
Terminal resistorwith disconnect function
PG connectorYes
The article 6ES7972-0BB12-0XA0 is a connector for the SIMATIC DP system by Siemens, specifically designed for use in PROFIBUS networks. It serves as a physical interface for connecting field devices and control systems in industrial environments. The connector enables a 90° cable exit, which is advantageous during installation in confined or space-limited setups. It is part of the SIMATIC DP product family and is used as accessories for PROFIBUS systems.

Applications

The connector is intended for use in industrial automation environments, particularly in systems based on PROFIBUS technology. It is mounted on DP master or DP slave devices to ensure communication within the fieldbus network. Typical applications include the manufacturing industry, process automation, or systems with decentralized peripherals. The 90° cable exit design is especially suitable for installations where the cable routing must run perpendicular to the device front, saving space or avoiding mechanical stress.

Functions and Features in Detail

The connector features an integrated termination resistor with a disconnect function. This function allows the resistor to be switched on in the network to ensure signal integrity, particularly at the end of a bus line. The disconnect function enables deactivation of the termination resistor when needed, which is helpful during diagnostics or network reconfiguration. Additionally, the connector is equipped with a PG socket for connecting programming or diagnostic devices. This facilitates commissioning, maintenance, and troubleshooting in the field.

Technology Explained Simply

The connector supports PROFIBUS transmission rates up to 12 MBit/s, which is sufficient for many industrial applications. The maximum data rate enables fast communication between control and peripheral devices. The 90° cable exit design reduces mechanical stress on the cable and improves installation convenience. Dimensions are 15.8 mm (width) × 64 mm (height) × 35.6 mm (depth), allowing compact integration into existing devices. The use of a termination resistor in PROFIBUS networks is required to avoid reflections at cable ends, which could cause signal disturbances. The integrated disconnect function provides flexibility in network configuration.

Compatibility and Accessories

The connector is specifically developed for SIMATIC DP systems and is compatible with PROFIBUS networks. It can be combined with other SIMATIC DP connectors, such as models 6ES7972-0BA52-0XB0 or 6ES7972-0BB52-0XB0, which are also designed for PROFIBUS up to 12 MBit/s. These models differ in design and cable exit, allowing selection based on installation requirements. Using SIMATIC DP connectors ensures standardized and reliable communication within Siemens control systems.

Mounting and Installation

Mounting is done on the front side of SIMATIC DP devices, with the 90° cable exit enabling cable routing perpendicular to the device front. The PG socket is intended for connection to programming devices, allowing commissioning and diagnostics directly at the device. Installation requires no additional tools or components, as the connector is directly plugged into the device. The disconnect function of the termination resistor can be activated or deactivated via a switch or electrical control, depending on network requirements.

Advantages in Operation

Using this connector provides a reliable and maintenance-friendly solution for PROFIBUS networks. The integrated disconnect function of the termination resistor reduces the need for additional components and simplifies network configuration. The PG socket enables direct diagnostics and programming, reducing maintenance time. The compact design and 90° cable exit support efficient space utilization in complex systems. Support for up to 12 MBit/s ensures sufficient data transfer rate for many industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/391170
qrcode für Siemens 6ES79720BB120XA0 Profibus PG 90 Connector