| General |
| Manufacturer | Siemens |
| Product type | Connector plug |
| Communication standard | PROFIBUS |
| Maximum data rate | 12 Mbit/s |
| Cable exit | 90° |
| Terminal resistor | with disconnect function |
| PG connector | None |
| Compatibility | SIMATIC DP |
The article 6ES7972-0BA12-0XA0 is a connector for SIMATIC DP, developed by Siemens for use in industrial automation systems. It serves as a physical connection point in the PROFIBUS network and enables the connection of field devices, controls, and other components via serial bus communication. The connector is specifically designed for use in industrial environments where reliable and robust data transmission is required.
Applications
This connector is used in automation systems, particularly in systems based on SIMATIC DP technology. It is suitable for applications in the manufacturing industry, process engineering, and other areas where PROFIBUS is used as a communication standard. It is typically used on DP master or DP slave devices to integrate them into a decentralized peripheral system.
Functions and Features in Detail
The connector enables data transmission in the PROFIBUS network with a maximum speed of 12 MBit/s. It features a 90° cable exit, allowing for compact mounting and efficient space utilization on devices. Dimensions are 15.8 mm (width) × 64 mm (height) × 35.6 mm (depth), ensuring a standardized installation solution. An integrated termination resistor with disconnect function ensures that the bus end is correctly terminated to avoid signal reflections. This is particularly important to ensure signal quality and communication stability in the network. The connector is supplied without a PG socket, meaning no additional screw connection for cable fixation is provided.
Technology Explained Simply
The connector is a passive component that does not require its own power supply. It serves exclusively as a mechanical and electrical interface between the PROFIBUS cable and the device. The disconnect function of the termination resistor allows the resistor to be switched off if needed, for example, during diagnostics or network installation, enabling temporary decoupling. The 90° connection geometry reduces mechanical stress on the cable and facilitates installation in confined spaces. The maximum transmission rate of 12 MBit/s corresponds to a standard for PROFIBUS-DP networks and ensures sufficient bandwidth for most industrial applications.
Compatibility and Accessories
The connector is specifically designed for use with SIMATIC DP systems and is compatible with PROFIBUS-DP networks. It can be combined with other connectors such as 6ES7972-0BA52-0XB0 or 6ES7972-0BB52-0XB0, depending on network topology and mounting requirements. These accessories are also designed for PROFIBUS networks and support the same data rate of up to 12 MBit/s. Using these connectors does not require additional adapters or converters, as they can be directly integrated into SIMATIC systems.
Mounting and Installation
Installation is done by directly inserting the connector into the corresponding connection on the SIMATIC DP board or device. The 90° cable exit requires appropriate cable positioning to avoid mechanical stress. The cable connection is made by crimping, which mechanically stabilizes the connection. It is important that the termination resistor is correctly configured to ensure network performance. Installation typically requires no additional tools, although a crimping tool is required for the cable connection.
Advantages in Operation
The use of this connector ensures a reliable and maintenance-friendly connection in the PROFIBUS network. The integrated disconnect function of the termination resistor enables flexible network diagnostics and configuration. The compact design and 90° cable exit facilitate installation in limited space. Use in SIMATIC systems ensures high compatibility and interoperability with other system components.