| General |
| Module type | Digital Input Module |
| Number of inputs | 16 |
| Operating voltage | 24 V DC |
| Input type | 3 (IEC 61131) |
| Type of input | Sink Input |
| Input delay | 0,05..20 ms |
| Diagnostic functions | wire break, supply voltage |
| Degree of protection | IP20 |
| Compatibility | Base-Unit Type A0 |
| Colour code | CC00 |
The Siemens SIMATIC ET 200SP Digital Input Module, type 6ES7131-6BH01-0BA0, is a decentralized I/O module for industrial automation technology. It serves as an input module for 16 digital signals with an operating voltage of 24 V DC and is designed for use in compact enclosures. The module is approved for protection class IP20 and is therefore suitable for installation in enclosed control cabinets, where it is protected against shock hazard and mechanical influences. It is specifically designed for use with Base-Units of type A0, ensuring compatible mounting in ET 200SP systems.
Applications
This module is used in decentralized automation systems, where digital signals from sensors, switches, or other field devices are transmitted to the control system. It is particularly suitable for applications in manufacturing automation, where a high number of signals is required in a compact design. Its use in combination with SIMATIC S7-1500 controllers enables a flexible and scalable system architecture.
Functions and Equipment in Detail
The module features 16 digital inputs with input type 3 according to IEC 61131. The inputs are configured as Sink-Input, meaning they receive PNP signals (positive-reading). The input delay ranges from 0.05 ms to 20 ms, allowing flexible adaptation to different requirements for signal processing speed. The module diagnostics detect faults such as wire breakage or power supply issues, simplifying troubleshooting during operation. The color code designation CC00 supports uniform identification in the enclosure.
Technology Explained Simply
The inputs are designed for 24 V DC, which is a standard voltage in industrial electronics. The Sink-Input function means that the module draws current from the field device (e.g., a PNP switch) to detect the signal. The input delay can be configured via the control system to filter disturbances or capture fast signals. Diagnostic functions enable continuous monitoring of input lines, allowing faults to be quickly localized during operation.
Compatibility and Accessories
The module is specifically developed for Base-Units of type A0, such as 6ES7193-6BP00-2BA0 or 6ES7193-6BP20-2BA0. It is part of the SIMATIC ET 200SP system, which offers a wide range of signal modules, communication modules, and technology modules. Compatible accessories include coding elements such as 6ES7193-6KA00-3AA0 (type A) or 6ES7193-6KB00-3AA0 (type B), which provide unique identification of modules in the enclosure. The use of labeling strips and reference identification plates supports clarity and maintainability.
Mounting and Installation
Mounting is carried out in a compact control cabinet, where the module is inserted into the Base-Unit. Uniform identification using color coding and reference plates simplifies installation and maintenance. The system supports Multi Hot Swapping, allowing modules to be replaced during operation without shutting down the entire control system.
Advantages in Operation
The combination of compact design, high signal count, and integrated diagnostic functions enables efficient and easy-to-maintain automation. Compatibility with the ET 200SP system and support for Multi Hot Swapping increase operational reliability and reduce downtimes. The uniform identification system ensures clear visibility in the enclosure, accelerating maintenance and fault diagnosis.