| General |
| Voltage | 24 VDC |
| Capacity | 3,2 Ah |
| Battery type | sealed lead-acid batteries |
| Mounting | standard profile rail or wall mounting |
| Compatibility | SITOP DC-UPS module 6 A and 15 A |
| Parallel operation | up to 6 modules |
| Status | maintenance-free |
| Connection | pre-wired with battery fuse holder and terminal clamps |
The Siemens SITOP battery module 6EP1935-6MD11 is a battery module for industrial DC uninterruptible power supply systems (DC-UPS). It serves as an energy buffer in combination with SITOP DC-UPS modules of power ratings 6 A and 15 A, to continue supplying critical loads with direct voltage in the event of a failure of the main power supply. The module is specifically designed for use in automation systems, where continuous power supply for controls, sensors or communication devices is required.
Applications
The battery module is used in industrial plants where interruption of power supply can lead to production downtime, data loss or safety risks. It is suitable for applications in manufacturing automation, process control as well as safety-critical systems such as emergency lighting or alarm systems. Buffering occurs at 24 V DC, which is a standard voltage in automation technology.
Functions and equipment in detail
The module features maintenance-free sealed lead-acid batteries with a capacity of 3.2 Ah. These accumulators are designed for industrial use and require no regular maintenance or refilling. The batteries are pre-wired within the module, simplifying installation. An integrated battery fuse holder and connection terminals enable a safe and reliable connection to the DC-UPS module. The maximum buffer time depends on the load and the number of parallel-connected modules; for a single module, it ranges from minutes to several hours, depending on consumption.
Technology explained simply
The technology is based on a direct current uninterruptible power supply (DC-UPS), where the battery is in standby mode during normal operation and is only activated in the event of a power failure. The battery module supplies the necessary energy to continue operating connected devices for a short period. The voltage is 24 V DC, which is compatible with most industrial controls and sensors. The capacity of 3.2 Ah means that the module can, for example, supply a load of 3.2 A for approximately one hour if no other energy source is available. Parallel connection of up to six modules allows for extension of the buffer time, with the total capacity adding up.
Compatibility and accessories
The battery module is specifically designed for use with SITOP DC-UPS modules of types 6 A and 15 A. Compatible modules include, for example, the DC-UPS module 6EP1931-2DC21 (6 A), 6EP1931-2EC21 (15 A) or 6EP1931-2EC42 (15 A with USB interface). The combination of DC-UPS module, power supply and battery module forms a complete DC-UPS system. Battery modules can be connected in parallel to extend buffer time, with the number of modules limited to a maximum of six.
Mounting and installation
Mounting is done either on a standard profile rail (e.g. DIN rail) or by direct wall mounting. The pre-wired design with integrated connection terminals and fuse holder reduces installation time and minimizes error sources. Fixing is done using screws or clips, depending on the mounting method. Installation should be carried out according to the guidelines of the respective DC-UPS module manufacturer to ensure safe and reliable operation.
Advantages in operation
The battery module provides reliable and maintenance-free energy buffering, increasing the operational safety of automation systems. The pre-wired construction and compatibility with common SITOP modules facilitate integration into existing systems. Parallel connection allows flexible adjustment of buffer time to meet the specific requirements of the plant. The use of sealed lead-acid batteries ensures safe and environmentally compatible operation without risk of fluid leakage.