| General |
| Switch type | Double changeover switch |
| Nominal voltage | 250 V |
| Nominal current | 10 A |
| Cleaning compensation | 3 mm |
| Screwdriver compatibility | Torx T10, slot |
| Product series | DELTA |
| Manufacturer | Siemens |
The Siemens 5TA2118 is a flush-mounted double changeover switch from the DELTA series, designed for installation in electrical distributions. It is used to control electrical loads via two separate switching functions, with each switch branch operating independently. The switch inserts are suitable for use in residential and commercial rooms where stylish and functional switching technology is required. The DELTA series is characterised by a wide range of stylish shapes and colours, enabling individual room design and enhancing the aesthetics of the space.
Double changeover switch
This switch is designed as a double changeover switch, meaning two independent switching functions are integrated into a single device. This design is particularly suitable for controlling multiple devices or lights from different locations, for example in corridors, stairwells or larger rooms.
Functions and equipment in detail
The switch is equipped with a combination screw suitable for both Torx screwdrivers (T10) and flathead screwdrivers. This simplifies installation and maintenance, as no special tools are required. The integrated 3 mm plaster compensation ensures that the switch can be securely and flush-mounted into the wall plate, even with uneven or varying thicknesses of plaster. This guarantees reliable operation and a clean visual appearance.
Technology explained simply
The switch is rated for an operating voltage of 250 V and a nominal current of 10 A. These values meet common requirements in residential and commercial electrical technology and allow control of lights, heaters or other loads operating within these electrical parameters. The switch inserts are designed for flush mounting, meaning they are installed into a prepared wall opening, with the front plate flush with the wall surface.
Compatibility and accessories
The switch is part of the DELTA product family and can be combined with various toggle levers and plates to create different design variants. Compatible accessories include, for example, toggle levers in colours such as Antracite Cosso, electrowhite, carbonmetallic, titanwhite or platinum-metallic, as well as plates for single and double changeover switches. Combining these elements allows for individual customisation of the switch front to match the room design. Toggle levers are available in various versions, including 2-way and series switch variants, some with labelling fields.
Installation and mounting
Installation is carried out using the flush mounting method, with the switch installed into a suitably prepared wall opening. The combination screw allows for easy fastening, using either T10 or flathead screwdrivers. The 3 mm plaster compensation ensures a secure and flush installation, even with uneven wall conditions. The switch inserts are designed for use in electrical distributions and require professional installation by qualified personnel.
A wide range of switch types, including off, changeover and cross switches, as well as special versions for blind control, motion sensors, time switches or room temperature regulation. The DELTA series thus offers a flexible platform for various application scenarios in electrical installation.
Operational advantages
The switch provides reliable switching performance at a nominal voltage of 250 V and a nominal current of 10 A. The integrated combination screw and plaster compensation simplify installation and ensure a clean appearance. Compatibility with various toggle levers and plates allows for individual design, adapting to the architecture and design requirements of the room. The switch inserts are suitable for use in residential and commercial rooms and meet the requirements of electrical installation technology.
Protection rating
The switch inserts are designed for flush mounting and require a corresponding wall opening. The protection rating is not explicitly stated, but the device is intended for indoor use, with mechanical stability and plaster compensation ensuring secure mounting.
Design and quality
The DELTA series from Siemens is characterised by a modern design and high quality. The switch inserts are designed in a stylish form that integrates well into various interior designs. The wide range of colours and shapes enables individual customisation, enhancing the aesthetics of the room. The use of high-quality materials ensures long service life and reliable performance.
Accessories and alternatives
Compatible accessories include various toggle levers and plates that can be used for individual customisation of the switch front. Examples include the toggle lever 5TG7145-0AC00 DELTA style Antracite Cosso, the toggle lever 5TG6275 DELTA i-system electrowhite, or the plate 5TG6282 DELTA i-system electrowhite for single and double changeover switches.
Application areas
The switch is suitable for use in residential and commercial rooms, particularly in areas where stylish and functional switching technology is required. It can be used in corridors, stairwells, living rooms or offices to control multiple electrical loads independently.
Compatibility
The switch is part of the DELTA product family and can be combined with various toggle levers and plates to create different design variants. Combining these elements allows for individual customisation of the switch front, adapting to the architecture and design requirements of the room.