Siemens 5SY74638, EAN: 4001869200590

Siemens 5SY7463-8 circuit breaker 63 A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY7463-8 circuit breaker 63 A

Lieske Part No. 299114
Mfg Part No 5SY74638
EAN-Code 4001869200590
Manufacturer Siemens
Here only 545,40 EUR
649,03 EUR incl. VAT

Further information for Siemens 5SY7463-8 circuit breaker 63 A

General
Operating voltage400 V
Rated short-circuit current15 kA
Nominal current63 A
Characteristic curveD
Number of poles4
Built-in width70 mm
Switching voltage400 V
Accessory compatibility5SY series
The circuit breaker 5SY7463-8 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in residential buildings, utility buildings, and special industrial applications. It is a 4-pole device with a rated current of 63 A, a switching voltage of 400 V, and a rated short-circuit breaking capacity of 15 kA. The D characteristic indicates high tripping sensitivity for inductive loads, making it particularly suitable for applications with motors or transformers. The mounting width is T=70 mm, enabling installation in standard installation rails.

Applications

The switch is intended for use in electrical distributions in the low-voltage range, particularly in buildings with complex electrical installations. It protects wiring and consumers against overloads and short circuits. The 4-pole design allows use in 3-phase systems with a neutral conductor, for example in 3+N systems. Use in industrial plants is possible, provided the operating conditions comply with the technical specifications.

Functions and Equipment in Detail

The circuit breaker features a double-chamber terminal, allowing any combination of conductors and busbars. This simplifies wiring and offers flexibility during installation. The rear-mounted busbar enables easy power input, reducing installation time. Tool-free mounting and dismounting is achieved via a double slider, simplifying handling during operation and maintenance. The switches are available in various pole configurations (1-, 2-, 3-, 4- as well as 1+N- and 3+N-pole), with accessories being universally compatible for all 5SY switches.

Technology Explained Simply

The D characteristic means the switch does not unnecessarily trip during high inrush currents, such as those occurring with motors or transformers. It only trips when the current exceeds 10 to 14 times the rated current, increasing reliability with inductive loads. The rated short-circuit breaking capacity of 15 kA indicates the switch can safely interrupt short circuits with currents up to 15,000 amperes. The operating voltage of 400 V corresponds to the standard in low-voltage supply in Germany. The mounting width of T=70 mm matches the standard module for modular installation devices and allows mounting in standard installation rails.

Compatibility and Accessories

The device is compatible with a range of accessories specifically developed for the SENTRON series 5SY. These include under-voltage release units (e.g. 5ST3040), auxiliary switches (e.g. 5ST3062), RCD modules (e.g. 5SM2345-6KK01, 5SM2345-0, 5SM2645-6), locking devices (e.g. 5ST3803, 5ST3801), remote control actuators (e.g. 5ST3073-0MC), load current release units (e.g. 5ST3030), and pin busbars (e.g. 5ST3654, 5ST3715). These components can be added according to the requirements of the protection system to enable additional functions such as remote control, signaling, or residual current protection.

Mounting and Installation

Mounting is tool-free using a double slider, enabling secure fixation in the enclosure. The double-chamber terminal allows connection of conductors and busbars, providing flexible wiring. The rear busbar simplifies power input, especially when installing in distributions with multiple switches. The mounting width of 70 mm corresponds to the standard module and fits into common installation rails.

Advantages in Operation

The switch offers high reliability due to tool-free mounting and robust construction. The double-chamber terminal and rear busbar reduce installation time and increase wiring flexibility. The universal accessory compatibility within the 5SY series enables standardized equipment of distributions, simplifying maintenance and interchangeability. The D characteristic ensures stable operation with inductive loads, avoiding unwanted tripping.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/299114
qrcode für Siemens 5SY7463-8 circuit breaker 63 A