| General |
| Operating voltage | 400 V |
| Rated short-circuit breaking current | 15 kA |
| Nominal current | 16 A |
| Characteristic | C |
| Number of poles | 3 |
| Mounting height | 70 mm |
| Accessory compatibility | 5SY series |
The circuit breaker
Siemens 5SY7316-7 belongs to the SENTRON series and is designed for safe short-circuit and overload protection in electrical installations. It is suitable for use in residential buildings, utility buildings, and special industrial applications. The device is 3-pole, features a C characteristic, and is rated for a nominal current of 16 A. The operating voltage is 400 V, and the switch has a rated breaking capacity of 15 kA. The design is intended for mounting in modular enclosures, with a mounting height of T=70 mm.
Applications
The switch is intended for use in low-voltage electrical distributions, particularly in buildings with electrical installations complying with current standards. It protects wiring and consumers against overload and short-circuit, with the C characteristic providing moderate tripping sensitivity suitable for installations with motor-driven loads or other devices with high inrush currents. The 3-pole configuration enables use in three-phase AC systems.
Functions and Features in Detail
The switch features a double-chamber terminal that allows any combination of conductors and busbars, simplifying installation and offering flexibility in wiring. The rear-mounted busbar facilitates easy wiring of the supply. Mounting and dismounting are tool-free via a dual slider, speeding up installation and enhancing work safety. The switches are available in various pole configurations (1-, 2-, 3-, 4-pole, as well as 1+N- and 3+N-pole), with accessories being universally compatible across all 5SY switches.
Technology Explained Simply
The C characteristic means the switch trips within seconds at a current of approximately 5 to 10 times the nominal current (here 16 A), with the exact tripping time depending on the current level. This is suitable for installations where short-term current surges occur (e.g., during motor start-up). The rated breaking capacity of 15 kA ensures the switch can safely interrupt even high short-circuit currents. The design with T=70 mm is intended for standard distribution enclosures that allow modular mounting.
Compatibility and Accessories
The device is compatible with a comprehensive range of accessories, which are universally compatible with all 5SY switches. Compatible components include pin busbars in various cross-sections (e.g. 10 mm², 16 mm²) and configurations (3-pole, 3x3-phase, shock-protected), handle locking devices, auxiliary switches, undervoltage release units, overload release units, and RCD modules for residual current protection. The RCD modules are available in various types, including Type A, selective, time-delayed, and with different nominal current ranges (e.g. 0.3–40 A) and residual current sensitivities (e.g. 30 mA, 1000 mA). These components can be added according to the protection requirements of the electrical installation.
Mounting and Installation
Mounting is tool-free via a dual slider, enabling secure and quick fixation in the distribution enclosure. The double-chamber terminal allows connection of conductors and busbars, providing flexible wiring options. The rear busbar simplifies supply wiring. The switches are designed for mounting in standard distribution enclosures with a module height of T=70 mm.
Operational Advantages
The switch offers high operational safety due to tool-free mounting and robust construction. Universal accessory compatibility allows flexible expansion of protection functions. The C characteristic ensures appropriate response to overloads and short-circuits without unnecessary tripping during inrush currents. The rated breaking capacity of 15 kA ensures reliable protection even under high short-circuit currents. The modular design with T=70 mm fits standardised distribution enclosures.