Siemens 5SY73107, EAN: 4001869191195

Siemens 5SY7310-7 circuit breaker 3p C-characteristic

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY7310-7 circuit breaker 3p C-characteristic

Lieske Part No. 282782
Mfg Part No 5SY73107
EAN-Code 4001869191195
Manufacturer Siemens
Here only 142,20 EUR
169,22 EUR incl. VAT

Further information for Siemens 5SY7310-7 circuit breaker 3p C-characteristic

General
Degree of protectionC
Nominal voltage400 V
Switching power15 kA
Nominal current10 A
Number of poles3 way
Construction typeT=70 mm
Terminal technologydouble chamber terminal
Mountingtool-free
Accessory compatibilityuniform for 5SY series
The circuit breaker 5SY7310-7 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in residential buildings, utility buildings, and special industrial applications. It is a 3-pole switch with C-characteristic, supporting a rated current of 10 A and a rated voltage of 400 V. The switching capacity is 15 kA, making it suitable for applications with high short-circuit currents. The design is intended for modular installation, with tool-free mounting and dismounting facilitated by a double slider. The terminals are designed as double-chamber terminals, allowing any combination of conductors and busbars. The supply connection is simplified by a rear-mounted busbar, making wiring in enclosures more efficient.

Applications

The switch is intended for use in electrical distribution systems, particularly in buildings with a rated voltage of 400 V. It protects electrical lines and devices against overload and short-circuit. The 3-pole configuration makes it especially suitable for 3-phase networks, commonly used in residential, commercial, and industrial installations. The C-characteristic is suitable for systems with medium to high inrush currents, such as motors or electronic devices that cause a temporary current surge during startup.

Functions and Equipment in Detail

The switch features a double-chamber terminal, enabling flexible connections between conductors and busbars. The rear busbar simplifies supply wiring, especially in complex enclosures. Tool-free mounting and dismounting is achieved via a double slider, speeding up installation and maintenance. The 5SY switch series is available in various pole configurations (1-, 2-, 3-, 4-pole, as well as 1+N- and 3+N-pole), allowing flexible adaptation to different requirements. Accessories are uniformly designed for all 5SY switches, ensuring compatibility and interchangeability.

Technology Explained Simply

The C-characteristic means the switch trips within seconds at a current of 5 to 10 times the rated current (here 50 to 100 A). This is suitable for systems that experience a temporary current surge during startup. The switching capacity of 15 kA indicates the maximum short-circuit current the switch can safely interrupt without damage. The rated voltage of 400 V corresponds to the standard for 3-phase networks in Germany and Europe. The design with D=70 mm is intended for installation in standard switchboards.

Compatibility and Accessories

Accessories for the 5SY7310-7 are uniformly designed for all 5SY switches. Available components include pin busbars in various versions (e.g. 10 mm², 16 mm², 3-phase, shock-protected), auxiliary switches (e.g. 5ST3010), locking devices (e.g. 5ST3801, 5ST3803), undervoltage release units (e.g. 5ST3040), overload release units (e.g. 5ST3030), and RCD modules (e.g. 5SM2332-6, 5SM2832-8, 5SM2335-6). These components can be combined according to requirements to achieve additional functions such as residual current protection, signaling, or mechanical protection.

Mounting and Installation

Mounting is tool-free using a double slider, accelerating installation in enclosures. The double-chamber terminal allows flexible connections between conductors and busbars. The rear busbar simplifies supply wiring. The switch series is designed for installation in standard switchboards with a depth of 70 mm. Uniform accessory compatibility enables flexible expansion of functions without replacing the base unit.

Operational Advantages

The switch provides reliable protection for electrical lines and devices. Tool-free mounting and dismounting reduces installation time. The flexible combination of conductors and busbars, along with uniform accessory compatibility, increases flexibility in planning and maintaining enclosures. The C-characteristic ensures appropriate protection for systems with medium to high inrush currents, without unnecessary tripping.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/282782
qrcode für Siemens 5SY7310-7 circuit breaker 3p C-characteristic