Siemens 5SY52637, EAN: 4001869226750

Siemens 5SY5263-7 circuit breaker 2-pole C 63A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY5263-7 circuit breaker 2-pole C 63A

Lieske Part No. 297601
Mfg Part No 5SY52637
EAN-Code 4001869226750
Manufacturer Siemens
Here only 317,70 EUR
378,06 EUR incl. VAT

Further information for Siemens 5SY5263-7 circuit breaker 2-pole C 63A

General
Degree of protectionall-current
Operating voltage400 V AC
Switching power10 kA
Number of poles2 way
Nominal current63 A
CharacteristicC
The circuit breaker 5SY5263-7 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in residential buildings, utility buildings, and special industrial applications. It is a 2-pole switch with a rated current of 63 A and a switching capacity of 10 kA. The switch is designed for operating voltages up to 400 V AC and 440 V DC and features a C-characteristic, suitable for typical consumer applications with medium inrush currents. The all-current function enables use in both DC and AC installations, thereby expanding the range of applications.

Applications

The switch is intended for use in electrical distributions in the field of building electrotechnics and in special industrial installations. It protects electrical lines and devices against overloads and short circuits. The 2-pole design makes it particularly suitable for two-phase installations or for protecting single-phase lines with an additional protective pole. Use in residential and utility buildings is facilitated by its robust construction and tool-free mounting.

Functions and Equipment in Detail

The switch features a double-chamber terminal, allowing any combination of conductors and busbars. This simplifies installation and provides flexibility in wiring. The rear-mounted busbar enables easy and quick power input, reducing installation time. Tool-free mounting and dismounting is achieved via a double slider, simplifying handling during operation and maintenance. The switches are available in various pole configurations, with the 5SY series also including 1-, 3-, 4- as well as 1+N- and 3+N-pole versions.

Technology Explained Simply

The C-characteristic means that the switch does not trip at currents up to approximately 5 times the rated current (i.e., up to 315 A), but only at higher currents indicating a short circuit or severe overload. The switching capacity of 10 kA indicates the maximum short-circuit current that can be interrupted without damaging the switch. The all-current capability (for AC and DC) expands application possibilities, especially in installations with DC components such as photovoltaic systems or electric vehicle charging stations. The operating voltage of 400 V AC and 440 V DC covers most industrial and commercial applications.

Compatibility and Accessories

Accessories for the 5SY series are standardized and can be universally used for all switches in this series. These include, for example, RCD modules such as the 5SM2325-3 for 30 mA, pin busbars such as the 5ST3610 (10 mm², 2-phase+HS/FS, shock protection) or the 5ST3707 (16 mm², 2-phase, length 1016 mm), as well as shut-off devices such as the 5ST3801 or 5ST3803. Other components include auxiliary switches (e.g. 5ST3010), fault signal switches (e.g. 5ST3020) and under-voltage release units (e.g. 5ST3040). Remote actuators such as the 5ST3073-0MC enable remote operation, which is useful in automated systems. Combining these accessories extends the switch’s functionality for specific requirements.

Mounting and Installation

Mounting is tool-free via a double slider, accelerating installation in distribution boards. The double-chamber terminal allows connection of conductors and busbars without additional tools. The rear busbar enables direct power input, simplifying wiring. The switches are designed for installation in standard distribution boxes and fit into common row-mounted systems.

Advantages in Operation

The switch offers high operational safety due to its robust construction and standardized accessory compatibility. Tool-free mounting reduces installation time and minimizes errors. The all-current capability and high switching capacity make it suitable for a wide range of applications. Clear labeling and easy handling facilitate maintenance and replacement during operation. The SENTRON series is known for its reliability in electrical distributions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/297601
qrcode für Siemens 5SY5263-7 circuit breaker 2-pole C 63A