Siemens 5SY51107, EAN: 4001869226392

Siemens 5SY51107 Circuit Breaker 10A 1p

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY51107 Circuit Breaker 10A 1p

Lieske Part No. 170775
Mfg Part No 5SY51107
EAN-Code 4001869226392
Manufacturer Siemens
Here only 76,41 EUR
90,93 EUR incl. VAT

Further information for Siemens 5SY51107 Circuit Breaker 10A 1p

General
Degree of protectionall-current
Operating voltage230/400 V AC
Direct current220 V DC
Switching power10 kA
Number of poles1 way
Switching curveC
Nominal current10 A
Built-in width1 TE
Mounting methodtool-free
Terminal technologydouble chamber terminal
Busbarrear-mounted
The circuit breaker 5SY5110-7 from Siemens belongs to the SENTRON product series and is designed for safe short-circuit and overload protection in electrical installations. It is specifically designed for use in residential buildings, utility buildings, and special industrial applications. As a 1-pole switch with a rated current of 10 A and a switching capacity of 10 kA, it provides reliable protection for electrical lines. The switching curve is of type C, indicating medium sensitivity to overloads and short circuits. The switch is designed for operating voltages of 230/400 V AC as well as 220 V DC, making it suitable for various applications in the low-voltage range.

Applications
The switch is used in electrical distributions where precise protection of individual circuits is required. It is particularly suitable for installations demanding high operational safety and easy maintenance. Use in residential and commercial buildings, as well as in industrial environments with specific protection requirements, is common. The 1-pole design enables targeted protection of individual lines, for example, for lighting circuits or small consumer installations.

Functions and Equipment in Detail
The switch features a double-chamber terminal, allowing any combination of conductors and busbars. This simplifies installation and provides flexibility in wiring. The rear-mounted busbar enables easy and quick wiring of the supply, reducing installation time. Mounting and dismounting is tool-free via a double slider, simplifying handling during operation and maintenance. The switches are available in various pole configurations, with the 5SY series offering uniform accessory compatibility.

Technology Explained Simply
The protection function of the circuit breaker is based on thermal and magnetic tripping. In case of overload, a bimetal strip heats up and triggers the switch after a time-delayed response. In case of a short circuit, the magnetic tripping mechanism causes immediate disconnection. The switching curve C means that the switch trips at approximately 5–10 times the rated current (i.e., 50–100 A at a 10 A rated current). The switching capacity of 10 kA ensures that the switch can safely disconnect even under high short-circuit currents. The operating voltage 230/400 V AC covers typical voltages in low-voltage installations, while the 220 V DC capability makes it suitable for applications with direct current.

Compatibility and Accessories
Accessories for the 5SY series are uniform and can be combined with all models in the series. These include, for example, pin busbars in various configurations (e.g., 3-phase, 1-phase, shock-protected), adapters for remote actuators, auxiliary and fault signal switches, under-voltage release mechanisms, and load current release mechanisms. These components allow individual adaptation of protection functions to specific requirements, such as remote control or fault state signaling. The use of busbars simplifies the parallel connection of multiple switches and reduces wiring effort.

Mounting and Installation
Mounting is tool-free using a double slider, enabling secure fixation in an enclosure or distribution board. The double-chamber terminal allows connection of conductors and busbars without additional tools. The rear busbar ensures direct and secure power supply. Installation is carried out in standard distribution enclosures, taking into account the installation width of 1 TE (type width). The switches are intended for use in enclosed switchgear, with environmental conditions complying with respective standards.

Advantages in Operation
The switch offers high operational safety due to its robust construction and uniform accessory compatibility. Tool-free mounting and dismounting reduces installation time and minimizes the risk of installation errors. Simple wiring via the rear busbar and flexible combinability with various busbars and accessories increases flexibility in planning and maintaining the installation. The protection functions are precisely tuned to reliably detect and disconnect both overloads and short circuits.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/170775
qrcode für Siemens 5SY51107 Circuit Breaker 10A 1p