Siemens 5SY44506, EAN: 4001869182100

Siemens 5SY44506 circuit breaker 50 A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY44506 circuit breaker 50 A

Lieske Part No. 297611
Mfg Part No 5SY44506
EAN-Code 4001869182100
Manufacturer Siemens
Here only 241,20 EUR
287,03 EUR incl. VAT

Further information for Siemens 5SY44506 circuit breaker 50 A

General
Nominal voltage400 V
Switching power10 kA
Nominal current50 A
Characteristic curveB
Number of poles4
Built-in width70 mm
The circuit breaker 5SY4450-6 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in residential buildings, utility buildings, and special industrial applications. It is a 4-pole switch with a rated current of 50 amperes and a switching voltage of 400 volts. The switching capacity is 10 kA, with the characteristic curve B defining the tripping characteristic for overload protection. The mounting width is 70 mm, enabling installation in standard installation enclosures. The switch is designed for use in electrical distributions where reliable protection against overloads and short circuits is required.

Applications
The switch is suitable for use in electrical installations in the field of building electrotechnics as well as in special industrial applications. It protects electrical lines and devices from damage caused by excessive current or short circuits. The 4-pole design enables protection of three-phase systems with neutral conductor, which is common in many residential and commercial installations. Use in residential buildings and utility buildings is supported by the robust construction and tool-free mounting.

Functions and Equipment in Detail
The switch features a double-chamber terminal that allows any combination of conductors and busbars. This simplifies installation and provides flexibility in wiring. The rear-mounted busbar facilitates easy wiring of the feed-in. Tool-free mounting and dismounting is achieved via a double slider, which speeds up installation and maintenance. The protective functions include both short-circuit and overload protection, with characteristic curve B representing a typical tripping characteristic for general applications.

Technology Explained Simply
The characteristic curve B means that the switch trips at a current of approximately 1.13 times the rated current (i.e., about 56.5 A at a 50 A rated current) within one hour. At higher currents, such as 5 times the rated current (250 A), tripping occurs within seconds. The switching capacity of 10 kA indicates the maximum energy the switch can safely interrupt without damage. The 4-pole design protects all three phases and the neutral conductor, which is required in distributions with 3+N systems. The mounting width of 70 mm corresponds to the standard for modular devices in enclosures.

Compatibility and Accessories
The complete range of accessories is uniformly compatible with all circuit breakers in the 5SY series. Available accessories include auxiliary switches, interlock devices, RCD blocks, remote actuators, undervoltage release units, current release units, and pin busbars. These components can be attached to the switch according to requirements to enable additional functions such as remote control, signaling, or fault detection. The accessories are specifically developed for the 5SY series and ensure safe and compatible integration.

Mounting and Installation
Mounting is tool-free via a double slider, enabling quick and secure fixation in the enclosure. The double-chamber terminal allows connection of conductors and busbars, providing flexible wiring options. The rear busbar simplifies feed-in, especially when wiring multiple switches. The mounting width of 70 mm corresponds to the standard for modular devices and fits into common installation enclosures.

Operational Advantages
The switch provides reliable protection through the combination of short-circuit and overload protection. Tool-free mounting reduces installation time and minimizes error susceptibility. The uniform accessory compatibility of the 5SY series enables flexible expansion of functions. The robust construction and clear operation ensure safe and maintenance-friendly use in daily operation. The protective functions are designed for use in residential and commercial installations, with the 4-pole design enabling protection of 3+N systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/297611
qrcode für Siemens 5SY44506 circuit breaker 50 A