Siemens 5SY43637, EAN: 4001869182018

Siemens 5SY43637 circuit breaker 3p C 63 A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY43637 circuit breaker 3p C 63 A

Lieske Part No. 110191
Mfg Part No 5SY43637
EAN-Code 4001869182018
Manufacturer Siemens
Here only 299,70 EUR
356,64 EUR incl. VAT

Further information for Siemens 5SY43637 circuit breaker 3p C 63 A

General
Degree of protectionC
Nominal current63 A
Switching voltage400 V
Switching power10 kA
Number of poles3 way
Height70 mm
Accessory compatibility5SY series
The circuit breaker 5SY4363-7 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in electrical installations. It is available in a 3-pole configuration with a rated current of 63 A and a switching voltage of 400 V. The switching capacity is 10 kA, making it suitable for use in residential buildings, utility buildings, and special industrial applications. The switch features type C tripping, which is typical for installations with medium to high inrush currents, such as motors or heating appliances. The design is intended for row mounting in switchboards, where installation and removal can be done without tools, supported by a double slider. This significantly simplifies installation and maintenance.

Applications

The switch is intended for use in electrical distributions within low-voltage technology. It protects wiring and consumers against overload and short-circuit. The 3-pole configuration makes it particularly suitable for three-phase AC installations, for example in apartments, office buildings, or industrial distributions. The protection function is achieved through thermal and magnetic tripping elements, which disconnect the circuit when the rated current is exceeded or in case of sudden current surges.

Functions and Equipment in Detail

A central feature is the double-chamber terminal, which allows any combination of conductors and busbars. This provides flexibility in wiring and simplifies integration into existing installations. The rear-mounted busbar enables simple and safe wiring of the feed-in. The mounting height is 70 mm (D=70 mm), defining the installation size in standard switchboards. The switches are available in various pole configurations, including 1-, 2-, 3-, 4- as well as 1+N- and 3+N-pole versions, with accessories being universally compatible with all 5SY switches.

Technology Explained Simply

Type C protection means the switch trips at a current of approximately 5 to 10 times the rated current (i.e., 315 to 630 A). This is typical for installations with high inrush currents. The switching capacity of 10 kA indicates the maximum current the switch can safely interrupt without damage. The operating voltage of 400 V refers to the nominal voltage in three-phase AC installations. Tool-free mounting via the double slider reduces installation time and increases safety during installation.

Compatibility and Accessories

Accessories for the 5SY series are standardized and can be combined with all models in the series. These include, for example, pin busbars in various configurations (e.g., 10 mm², 16 mm², 3-phase, shock-protected), auxiliary switches (e.g., 5ST3010, 5ST3062), locking devices (e.g., 5ST3801, 5ST3803), RCD modules (e.g., 5SM2335-6, 5SM2635-8), and undervoltage release units (e.g., 5ST3040). These components allow individual adaptation to specific requirements, such as integrating residual current protection or mechanical locking of the switch handle.

Mounting and Installation

Mounting is performed in standard switchboards with row installation. The tool-free mounting via the double slider enables quick and secure installation. The double-chamber terminal allows connection of conductors and busbars, enabling flexible wiring. The rear busbar facilitates feed-in, especially in complex distributions. The installation size of 70 mm (D=70 mm) corresponds to the standard for this switch class.

Advantages in Operation

The switch offers high operational safety through the combination of thermal and magnetic tripping. Tool-free mounting reduces installation time and increases safety. Standardized accessory compatibility enables flexible expansion of the installation. The double-chamber terminal and rear busbar improve wiring efficiency. The protection functions are designed for use in residential and industrial installations, with the switching capacity of 10 kA ensuring high safety in short-circuit events.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/110191
qrcode für Siemens 5SY43637 circuit breaker 3p C 63 A