Siemens 5SY43507, EAN: 4001869182001

Siemens 5SY43507 Circuit Breaker 3p C 50A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY43507 Circuit Breaker 3p C 50A

Lieske Part No. 470224
Mfg Part No 5SY43507
EAN-Code 4001869182001
Manufacturer Siemens
Here only 255,60 EUR
304,16 EUR incl. VAT

Further information for Siemens 5SY43507 Circuit Breaker 3p C 50A

General
Switching power10 kA
Nominal voltage400 V
Nominal current50 A
Switching curveC
Number of poles3 way
Built-in width70 mm
Accessory compatibility5SY series
Mounting methodtool-free
Terminal technologydouble chamber terminal
Busbar connectionrear-mounted
The circuit breaker 5SY4350-7 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in electrical installations. It is intended for use in residential buildings, utility buildings, and special industrial applications. The device is 3-pole, with a rated voltage of 400 V and a rated current of 50 A. The tripping curve is of type C, indicating medium sensitivity for loads with moderate inrush current, such as lighting or heating. The breaking capacity is 10 kA, ensuring high short-circuit resistance and thus secure protection against high fault currents. The design is intended for modular installation, with a mounting width of T=70 mm. Mounting is tool-free via a double slider, simplifying and accelerating installation and removal.

Applications

The switch is intended for use in low-voltage installations in the field of electrical energy distribution. It is suitable for applications requiring reliable protection against overload and short-circuit. The 3-pole design makes it particularly suitable for 3-phase networks, commonly used in residential and commercial buildings as well as industrial installations. Use in 1+N- or 3+N-pole configurations is also possible, with the exact configuration varying according to the application scenario.

Functions and Equipment in Detail

A central feature is the double-chamber terminal, which allows any combination of conductors and busbars. This provides flexibility in wiring and simplifies integration into existing control panels. The rear-mounted busbar enables simple and quick wiring of the feed-in, reducing installation time. The switches are available in various pole counts, and the 5SY series offers uniform accessory compatibility. This means accessories such as auxiliary switches, lockout devices, or pin busbars can be used for all models in the 5SY series.

Technology Explained Simply

The tripping curve C means the switch trips within seconds at a current of approximately 5 to 10 times the rated current (here 50 A). This is suitable for loads with moderate inrush current. The rated voltage of 400 V corresponds to the standard for 3-phase networks in Germany and Europe. The breaking capacity of 10 kA indicates the maximum short-circuit current the switch can safely handle without damage. The design T=70 mm is intended for mounting height in standard control panels and allows compact arrangement of multiple devices side by side.

Compatibility and Accessories

The device is compatible with a wide range of accessories specifically developed for the 5SY series. These include auxiliary switches such as the 5ST3010, which can be mounted and used for signal transmission in control systems. Pin busbars such as the 5ST3645 or 5ST3615 in various cross-sections (e.g. 10 mm² or 16 mm²) enable safe and shock-protected connections between multiple switches. Lockout devices such as the 5ST3803 or 5ST3801 provide mechanical protection of the switch handle to prevent unintended operation. Remote actuators such as the 5ST3073-0MC enable remote control of the switch, with compatibility for RCD/IR test functions. FI modules such as the 5SM2335-6 or 5SM2635-8 can be used to integrate residual current protection functions into the control panel.

Mounting and Installation

Mounting is tool-free via a double slider, enabling simple and secure fixation in the enclosure. The double-chamber terminal allows flexible connection of conductors and busbars, adapting wiring to the specific installation. The rear busbar simplifies feed-in wiring, as connections can be made from the back, improving accessibility within the enclosure. The mounting width of T=70 mm corresponds to the standard for modular devices and allows compact arrangement in control panels.

Operational Advantages

The switch offers high reliability due to its robust construction and high short-circuit resistance of 10 kA. Tool-free mounting and removal reduce installation time and minimize labor effort. Uniform accessory compatibility within the 5SY series enables flexible expansion of the installation with additional functions such as remote control, signal transmission, or residual current protection. The double-chamber terminal and rear busbar ensure flexible and secure wiring, simplifying maintenance and replacement.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/470224
qrcode für Siemens 5SY43507 Circuit Breaker 3p C 50A