Siemens 5SY43256, EAN: 4001869181790

Siemens 5SY43256 Circuit Breaker 3p 25A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY43256 Circuit Breaker 3p 25A

Lieske Part No. 290137
Mfg Part No 5SY43256
EAN-Code 4001869181790
Manufacturer Siemens
Here only 96,30 EUR
114,60 EUR incl. VAT

Further information for Siemens 5SY43256 Circuit Breaker 3p 25A

General
Operating voltage400 V
Switching power10 kA
Nominal current25 A
Number of poles3 way
Characteristic curveB
Mounting depth70 mm
The circuit breaker 5SY4325-6 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in electrical installations. It is intended for use in residential buildings, utility buildings, and special industrial applications. The device is 3-pole and offers a rated current of 25 A at a switching voltage of 400 V. The switching capacity is 10 kA, ensuring high safety in the event of short circuits. The characteristic curve B defines the tripping characteristic, suitable for typical consumer installations with low inrush current. Mounting is tool-free via a double slide, simplifying installation and removal. The terminal design allows any combination of conductors and busbars through a double-chamber terminal. Supply wiring can be easily connected via the rear-mounted busbar, making installation in enclosures more efficient.

Applications

The switch is intended for use in low-voltage electrical distributions, particularly in residential and commercial buildings as well as industrial installations, where reliable protection against overload and short circuit is required. The 3-pole configuration makes it suitable for three-phase AC systems.

Functions and Equipment in Detail

The circuit breaker 5SY4325-6 features a robust construction with a double-chamber terminal, enabling flexible connections between conductors and busbars. Tool-free mounting via the double slide reduces installation time and minimizes the need for special tools. The rear busbar facilitates wiring for supply connections, especially in complex distributions. The 5SY switch series is available in various pole configurations (1-, 2-, 3-, 4-pole, as well as 1+N- and 3+N-pole), ensuring a uniform system solution for different requirements.

Technology Explained Simply

The characteristic curve B means that the switch trips within seconds at a current of approximately 3 to 5 times the rated current (i.e., 75 to 125 A). For lower overloads (e.g., 1.13 times rated current), the switch will trip after a defined time (usually several hours) to prevent thermal overloads. The switching capacity of 10 kA ensures that the switch can safely disconnect even under high short-circuit currents without damage. The operating voltage of 400 V is standard for European power supply. The depth of 70 mm is designed for mounting in standard modular enclosures.

Compatibility and Accessories

Accessories for the 5SY series are standardized and can be combined with all devices in this series. Available components include pin busbars in various configurations (e.g., 3-phase, 10 mm², 16 mm², fully insulated), auxiliary switches (e.g., 5ST3010, 5ST3062), fault signal switches (e.g., 5ST3020), undervoltage release units (e.g., 5ST3040), and locking devices (e.g., 5ST3801, 5ST3803). These components allow flexible expansion of the switching system, e.g., for signaling functions, undervoltage protection, or mechanical locking of the switch handle.

Mounting and Installation

Mounting is tool-free in modular enclosures with a depth of 70 mm. The double slide enables simple and secure fixation in the enclosure. Wiring is done via the double-chamber terminal, which supports both direct connection to conductors and to busbars. The rear busbar simplifies supply wiring, especially in complex distributions. Installation is carried out in enclosed enclosures, where ambient temperature and humidity must comply with operating conditions.

Advantages in Operation

The switch offers high reliability due to its robust construction and tool-free mounting. The standardized accessory compatibility of the 5SY series allows flexible expansion of the installation. The double-chamber terminal and rear busbar reduce installation time and improve wiring safety. The tripping characteristic B is optimally suited for typical applications in residential and commercial buildings. The switching capacity of 10 kA ensures safe operation even under high load conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/290137
qrcode für Siemens 5SY43256 Circuit Breaker 3p 25A