Siemens 5SY43027, EAN: 4001869181882

Siemens 5SY43027 Circuit Breaker 3p C 2A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY43027 Circuit Breaker 3p C 2A

Lieske Part No. 188015
Mfg Part No 5SY43027
EAN-Code 4001869181882
Manufacturer Siemens
Here only 144,90 EUR
172,43 EUR incl. VAT

Further information for Siemens 5SY43027 Circuit Breaker 3p C 2A

General
Nominal voltage400 V
Rated short-circuit current10 kA
Number of poles3
Switching curveC
Nominal current2 A
Built-in width70 mm
Connection typedouble chamber terminal
Mounting methodtool-free with double slide
Accessory compatibility5SY series
The circuit breaker Siemens 5SY4302-7 belongs to the SENTRON 5SY4 product series and is designed for safe short-circuit and overload protection in electrical installations. It is suitable for use in residential buildings, utility buildings, and special industrial applications. The device is 3-pole, has a rated voltage of 400 V and a rated short-circuit current of 10 kA. The tripping curve is of type C, indicating medium sensitivity to overloads, and the rated current is 2 A. The mounting width is 70 mm, enabling installation in standard installation enclosures.

Applications

The switch is intended for protective functions in electrical distributions where reliable disconnection is required in case of overload or short-circuit. It is typically used in distribution boxes for lighting, heating, small consumers, or in industrial installations with low power demand. The 3-pole configuration makes it suitable for 3-phase networks, particularly in installations requiring symmetrical load distribution.

Functions and Equipment in Detail

The circuit breaker features a double-chamber terminal, allowing flexible combination of individual conductors and busbars. This simplifies wiring and reduces installation time. The rear-mounted busbar enables easy and secure power input. Mounting and removal are tool-free via a double slider, which accelerates installation in operation and reduces the risk of errors. The 5SY4 switch series is available in various pole configurations (1-, 2-, 3-, 4-pole as well as 1+N- and 3+N-pole), enabling flexible adaptation to different requirements.

Technology Explained Simply

The tripping curve C means that the switch disconnects within seconds at a current of approximately 5 to 10 times the rated current (here 2 A). This is suitable for installations with moderate inrush currents, such as those occurring with motors or electronic devices. The rated voltage of 400 V covers typical low-voltage networks in Germany. The rated short-circuit current of 10 kA indicates the maximum energy the switch can safely interrupt without damage. The mounting width of 70 mm corresponds to the standard for modular devices and allows installation in common distribution boxes.

Compatibility and Accessories

Accessories for the 5SY series are standardized and can be universally used. These include auxiliary switches such as the 5ST3062, available as a changeover switch for 230/400 V AC and 24–220 V DC, as well as undervoltage release units like the 5ST3040. For additional residual current protection, RCD modules such as the 5SM2332-6 (Type A, 30 mA) or the 5SM2832-8 (Type A, selective, 1000 mA) can be used. Busbars such as the 5ST3740 (3-phase, 1016 mm) or the 5ST3645 (16 mm², 4x3-phase, shock-protected) enable safe and structured wiring. Remote control units such as the 5ST3073-0MC allow remote operation of the switch.

Mounting and Installation

Mounting is tool-free via the double slider, which is inserted into the distribution box. The double-chamber terminal allows connection of individual conductors and busbars, enabling flexible wiring. The rear busbar facilitates power input. The mounting width of 70 mm corresponds to the standard for modular devices and fits into common distribution boxes. The switch series is intended for use in enclosed distribution units.

Operational Advantages

The switch offers high operational safety through tool-free mounting and flexible wiring options. The standardized accessory interface for the entire 5SY series reduces inventory requirements and simplifies maintenance. The tripping curve C provides balanced protection, neither overly sensitive nor too slow. The robust construction and high short-circuit withstand capability of 10 kA make the switch suitable for a wide range of applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/188015
qrcode für Siemens 5SY43027 Circuit Breaker 3p C 2A