Siemens 5SY42106, EAN: 4001869181479

Siemens 5SY42106 Circuit Breaker 2p B 10A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY42106 Circuit Breaker 2p B 10A

Lieske Part No. 170912
Mfg Part No 5SY42106
EAN-Code 4001869181479
Manufacturer Siemens
Here only 61,74 EUR
73,47 EUR incl. VAT

Further information for Siemens 5SY42106 Circuit Breaker 2p B 10A

General
Degree of protectionB
Nominal voltage400 V
Switching power10 kA
Number of poles2 way
Nominal current10 A
Built-in width70 mm
The circuit breaker 5SY4210-6 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in electrical installations. It is intended for use in residential buildings, utility buildings, as well as in special industrial applications. The device is 2-pole, has a rated current of 10 A and a switching capacity of 10 kA at an operating voltage of 400 V. Protection type B ensures selective tripping in case of overloads and short circuits, with the tripping delay for overloads typically being longer than for short circuits. The mounting width is 70 mm, making it suitable for standard installation enclosures.

Applications

The switch is intended for use in low-voltage installations, particularly in buildings with electrical power supply, where reliable protection of lines and consumers is required. It can be used in residential and commercial buildings, as well as in industrial environments with low to medium fault current risk. The 2-pole design enables protection of lines in single-phase and multi-phase systems, with wiring carried out via the rear busbar.

Functions and Equipment in Detail

The circuit breaker features a double-chamber terminal that allows any combination of conductors and busbars. This simplifies installation and maintenance, as no special tools are required for mounting. Tool-free mounting and removal is achieved via a double slider, enabling quick and secure installation and removal of the device. The rear busbar ensures simple and safe wiring of the supply, making installation in enclosures more efficient.

Technology Explained Simply

Protection type B means that the switch trips after a certain delay time in case of overloads (e.g., due to excessive current draw), while it reacts immediately to sudden short circuits (high current surge). The rated voltage of 400 V and switching capacity of 10 kA define the maximum electrical load the device can safely handle. The mounting width of 70 mm corresponds to the standard for modular devices in enclosures and allows compact arrangement of multiple switches side by side.

Compatibility and Accessories

Accessories for the SENTRON series 5SY are standardized and can be universally used for all devices in this series. Available additional components include undervoltage release units (e.g. 5ST3040), current release units (e.g. 5ST3030), RCD modules (e.g. 5SM2322-0, 5SM2322-3, 5SM2121-6, 5SM2322-6, 5SM2322-6KK01, 5SM2622-8), fire protection switch modules (e.g. 5SM6021-2), locking devices (e.g. 5ST3803, 5ST3801), auxiliary switches (e.g. 5ST3062, 5ST3010, 5ST3020), remote actuators (e.g. 5ST3073-0MC), adapters (e.g. 5ST38201) as well as pin busbars (e.g. 5ST3735-2, 5ST3606, 5ST3735). These components extend the functionality of the switch, for example by enabling remote control, additional signaling, or residual current protection functions.

Mounting and Installation

Mounting is tool-free via a double slider, enabling secure and quick fixation in the enclosure. The double-chamber terminal allows connection of conductors and busbars, enabling flexible wiring. The rear busbar simplifies supply connection and ensures a proper and safe connection. The mounting width of 70 mm corresponds to the standard for modular devices and fits into standard installation enclosures.

Advantages in Operation

The switch offers high reliability in protecting electrical lines. Tool-free mounting reduces installation time and minimizes error sources. Universal compatibility with accessory components allows flexible adaptation to specific requirements, such as using RCD modules for residual current protection or auxiliary switches for signaling. The clear and robust design ensures long service life and easy maintenance in various application environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/170912
qrcode für Siemens 5SY42106 Circuit Breaker 2p B 10A