Siemens 5SY41106, EAN: 4001869181196

Siemens 5SY41106 Circuit Breaker 1p B 10A

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5SY41106 Circuit Breaker 1p B 10A

Lieske Part No. 187800
Mfg Part No 5SY41106
EAN-Code 4001869181196
Manufacturer Siemens
Here only 16,20 EUR
19,28 EUR incl. VAT

Further information for Siemens 5SY41106 Circuit Breaker 1p B 10A

General
Degree of protectionB
Nominal current10 A
Switching power10 kA
Operating voltage230/400 V
Number of poles1 way
The circuit breaker 5SY4110-6 from Siemens belongs to the SENTRON 5SY4 product series and is designed for safe short-circuit and overload protection in electrical installations. It is intended for use in residential buildings, utility buildings, and special industrial applications. The device is single-pole and offers a rated current of 10 A with a switching capacity of 10 kA. The operating voltage is 230/400 V, and the protection type B is the typical designation for selective tripping in case of overload and short circuit. Installation is tool-free via a double slider, simplifying both installation and removal. The width of the device is 70 mm, which corresponds to the standard width for single-pole switches in modular installations.

Applications

The switch is intended for use in electrical distributions where reliable protection against overload and short circuit is required. It is particularly suitable for applications in residential and commercial buildings, where the safety of the electrical installation is paramount. The single-pole design makes it suitable for single-phase circuits, such as lighting, heating, or small consumers. Protection type B ensures selective tripping, which does not activate during transient load peaks, such as those occurring with motors or electronic devices, but only during sustained overloads or short circuits.

Functions and Equipment in Detail

A central feature of the device is the double-chamber terminal, which allows any combination of conductors and busbars. This simplifies wiring and provides flexibility during installation. The rear-mounted busbar enables simple and secure power input, making the cabling more efficient. Tool-free mounting via the double slider reduces installation effort and speeds up installation time. The switches are available in various pole configurations, and accessories are uniformly designed for all 5SY switches.

Technology Explained Simply

The switch operates based on the principle of thermal and magnetic tripping mechanisms. In case of overload, a bimetal strip heats up and trips the switch once a certain temperature is reached. In case of a short circuit, a magnetic tripping mechanism is activated, which reacts immediately to the high current flow. Protection type B is crucial here, as it enables selective tripping that does not activate during short-term current surges, but only during sustained overloads or short circuits. The rated current of 10 A defines the maximum current the switch can carry continuously without tripping.

Compatibility and Accessories

The device is compatible with a comprehensive range of accessories specifically developed for the 5SY series. This includes adapters such as the 5ST38201 for remote actuators, various pin busbars in different cross-sections (e.g. 10 mm², 16 mm²) and configurations (single-phase, three-phase, shock-protected), as well as auxiliary and fault signal switches such as the 5ST3020 or 5ST3062-0MC. Remote actuators like the 5ST3073-0MC enable remote control of the switch. Locking devices such as the 5ST3803 or 5ST3801 provide additional safety during installation and maintenance. The uniform accessory compatibility for all 5SY switches simplifies planning and installation.

Mounting and Installation

Mounting is tool-free via a double slider, which is inserted into the distribution unit. The width of 70 mm corresponds to the standard for single-pole switches in modular installations. The double-chamber terminal allows flexible connection of conductors and busbars, making wiring adaptable. The rear busbar simplifies power input and reduces the number of required connections. Installation is carried out in standard distribution boxes designed for modular installations.

Operational Advantages

The switch offers high reliability in protecting electrical circuits. Tool-free mounting reduces installation effort and accelerates commissioning. The double-chamber terminal and rear busbar increase flexibility in wiring. Uniform accessory compatibility for the entire 5SY series simplifies planning and maintenance. Protection type B ensures selective tripping that does not activate during transient load peaks, increasing system availability. The switching capacity of 10 kA protects the installation even under high short-circuit currents.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/187800
qrcode für Siemens 5SY41106 Circuit Breaker 1p B 10A