Further information for Siemens 5SV3614-6KL residual current circuit breaker 2-pole 40A
General
Degree of protection
Type A
Nominal current
40 A
Earth fault trip current
300 mA
Operating voltage
230 V
Number of poles
2
Polarity
N-left
Mounting height
2 TE
Switch type
Earth leakage switch
Series
SENTRON 5SV3
Actuation
slider manual operation
Cable grip and touch protection
included as standard
Data matrix code
The Siemens residual current circuit breaker type 5SV3614-6KL is a 2-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It is designed as type A, meaning it can detect and interrupt both alternating and direct current fault currents. The device features a rated current of 40 A and a residual current tripping value of 300 mA, with an operating voltage of AC 230 V. The polarity is configured with N on the left, which is important for installation arrangements in switchgear. The devices are intended for use in electrical installations in the field of building electrotechnics, particularly in residential and commercial buildings, where reliable protection against electrical hazards is required.
Applications
The RCD 5SV3614-6KL is suitable for use in electrical distributions where high protection against electric shock is required. It is typically used in distribution boards, enclosures or in household installations to protect electrical systems and persons. Use in apartments, office buildings or small commercial enterprises is common, especially in areas with increased moisture or contact risk such as bathrooms, kitchens or workshops.
Functions and Equipment in Detail
The switch provides standard creepage and shock protection, ensuring safe handling and minimizing the risk of accidents during installation or maintenance. The slider-hand operation allows tool-free removal of the device from the DIN rail or from the busbar system, simplifying mounting and dismounting. A data matrix code on the device enables quick access to technical data via the Siemens Industry Online Support app, facilitating maintenance and documentation.
Technology Explained Simply
The residual current circuit breaker operates on the principle of differential current measurement. It monitors the current flow in the conductors and detects any difference between incoming and outgoing current — an indication that current is flowing through a fault path, e.g. through a person. When the set residual current of 300 mA is reached, the switch automatically trips and interrupts the power supply. The type A setting allows detection of pulsating direct current fault currents, which can occur with modern electronic devices. The operating voltage of 230 V AC is standard for typical household installations in Germany and many other countries.
Compatibility and Accessories
The switch is part of the SENTRON system and can be extended with various accessories from the system kit. These include, for example, pin busbars such as the 5ST3734 (10 mm², 2-pole, 214 mm) or the 5ST3770-3 (16 mm², 4-pole, cuttable), auxiliary switches such as the 5ST3062 (changeover switch, 0.5 TE) or the 5ST3020 (fault signal switch), as well as adapters such as the 5ST38206 for mounting on LS switches. Remote actuators such as the 5ST3073-0MC enable remote control, and terminal covers such as the 5SW3004 provide additional protection. Compatibility with these components allows flexible and modular adaptation to specific requirements.
Mounting and Installation
The RCD is mounted on a DIN rail, with the slider-hand operation enabling tool-free mounting and dismounting. The mounting height is 2 TE (module units), allowing placement in standard distribution boxes. The N-left polarity must be observed during installation to ensure correct arrangement of conductors (N and L lines). The use of suitable pin busbars and terminal covers can complement the installation and increase safety.
Advantages in Operation
The switch offers high reliability and fast response time when detecting residual current. Integrated safety features such as creepage and shock protection increase safety during handling. The ability to retrieve technical data via the data matrix code supports maintenance and documentation. The expandability through the SENTRON accessory system allows flexible adaptation to different requirements without replacing the base device.