Further information for Siemens 5SV3346-4KK14 residual current circuit breaker 3+N-pole 30mA
General
Release characteristic
Short-time delayed
Nominal current
63 A
Earth fault trip current
30 mA
Operating voltage
400 V
Number of poles
4
Degree of protection
encircling and touch protection
Mounting method
DIN rail (top hat rail)
Isolation units
4 TE
SIGRES
Difficult environmental conditions, extended test interval
Data matrix code
The Siemens residual current circuit breaker type 5SV3346-4KK14 is a 4-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It features a rated current of 63 A and a residual current trip value of 30 mA, with an operating voltage of AC 400 V. The switch is classified as type B+ and has a short-time delayed tripping characteristic, making it suitable for applications with transient fault currents. The designation SIGRES indicates a special version designed for challenging environmental conditions and enabling an extended test interval to ensure reliability in demanding operating environments.
Residual current circuit breaker with type B+ tripping characteristic is designed for detection and disconnection in case of alternating and direct current fault currents, making it particularly suitable for installations with electronic devices or systems with rectifiers. The short-time delayed tripping ensures that the switch does not immediately trip during brief, non-hazardous fault currents, but instead incorporates a short delay to enable selective disconnection within the electrical installation.
Protection class and enclosure and touch protection are integrated as standard, enhancing installation safety and minimizing the risk of accidents due to unintended contact with conductive parts. The switches are designed for mounting on a DIN rail and feature a slider-hand operation, allowing the device to be removed tool-free from the DIN rail or from the busbar system. This facilitates maintenance and replacement operations during operation.
Data matrix code on the device enables quick access to all technical data via the Siemens Industry Online Support App. This supports maintenance and documentation during operation, especially in complex installations with numerous switching devices.
The SENTRON protective devices can be expanded with a comprehensive accessory system from the Siemens system building kit. This includes, for example, auxiliary switches, fault signal switches, pin busbars in various versions, remote actuators, and terminal covers. These components allow the switch to be adapted to specific requirements, such as integration into larger electrical installations or expansion with signaling functions.
Mounting is done on a DIN rail, with the switches requiring 4 TE (module units) of space. The use of accessories such as pin busbars (e.g. 5ST3770-4, 5ST3770-5) or auxiliary switches (e.g. 5ST3062) requires appropriate planning of the electrical installation to ensure electrical connection and mechanical fixation. The switches are designed for use in electrical installations requiring high safety standards, particularly in residential and commercial buildings as well as industrial applications.
Compatibility with the Siemens SENTRON system building kit enables combination with various accessories that extend functionality. Examples include the terminal cover cap 5SW3005 for surface mounting, the pin busbar 5ST3770-4 for 10 mm² cross-section, or the auxiliary switch 5ST3010. These components can be added according to the requirements of the electrical installation to realize additional functions such as signal output, remote operation, or improved cable connection.
The operating voltage of AC 400 V and the rated current of 63 A make the switch suitable for use in standard mains voltages in Europe. The 4-pole configuration (3+N) enables disconnection of all conductors, including the neutral conductor, which is required in certain protection concepts. The protection class is not explicitly stated, but the integration of enclosure and touch protection indicates high mechanical and electrical safety.
Operational advantages include tool-free mounting and dismounting, expandability with accessories, and digital support via the data matrix code. The use of standardized accessories from the SENTRON system building kit ensures high compatibility and simplifies planning and maintenance of the electrical installation. The switches are designed for use in electrical installations requiring high reliability and safety, particularly in environments with increased risk of electrical hazards.