Siemens 5SV33446KL, EAN: 4001869430126

Siemens 5SV3344-6KL RCD Switch 4-pole 30mA

Installation > Modular devices / equipment installation > RCD

Siemens 5SV3344-6KL RCD Switch 4-pole 30mA

Lieske Part No. 369487
Mfg Part No 5SV33446KL
EAN-Code 4001869430126
Manufacturer Siemens
Here only 119,70 EUR
142,44 EUR incl. VAT

Further information for Siemens 5SV3344-6KL RCD Switch 4-pole 30mA

General
Degree of protectionType A
Number of poles4
Nominal current40 A
Earth fault trip current30 mA
Operating voltage400 V AC
N-conductor positionLeft
Switch typeEarth leakage switch
SeriesSENTRON 5SV3
Manual operationslider manual operation
Cable grip and touch protectionincluded as standard
Data matrix codeYes
The Siemens residual current circuit breaker type 5SV3344-6KL is a 4-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It features a rated current of 40 A and a residual current trip value of 30 mA, with the N conductor positioned on the left. The device is designed for operating voltages up to 400 V AC and is suitable for installations in residential and commercial buildings as well as industrial facilities, where reliable protection against residual currents is required.

Applications

The RCD is used in electrical distributions to quickly and safely disconnect the circuit in the event of residual currents. It is particularly suitable for applications requiring high safety standards, such as bathrooms, kitchens, outdoor areas, or for supplying electrical devices with high touch risk. The 4-pole configuration enables protection of 3-phase systems with integrated N conductor, which is common in modern distributions.

Functions and equipment in detail

The switch is designed as type A, meaning it can detect and switch off both alternating and direct current residual currents. This is particularly important when using electronic devices that may generate direct current components in the residual current. The integrated encircling and shock protection ensures that terminals and contacts cannot be touched during operation, increasing safety during installation. The slider-hand operation allows for tool-free removal of the device from the DIN rail or from the busbar system, simplifying installation and maintenance.

Technology explained simply

The residual current circuit breaker continuously monitors the current flow in the conductors. If a difference between incoming and outgoing current is detected — i.e., a residual current — the circuit is disconnected within milliseconds. The trip value of 30 mA corresponds to the safety standard for personal protection. The rated voltage of 400 V AC covers typical network conditions in Europe. The DataMatrix code on the device enables quick access to technical data via the Siemens Industry Online Support App, facilitating maintenance and documentation.

Compatibility and accessories

The switch is part of the SENTRON system and can be extended with various accessories available in the system kit. These include auxiliary switches, fault signal switches, load current tripping units, undervoltage tripping units, as well as various busbars and covers. Combining it with pin busbars (e.g. 5ST3868 or 5ST3783-0KL) enables compact and secure mounting in distribution boards. Additionally, remote actuators (e.g. 5ST3073-0MC) or auxiliary switches (e.g. 5ST3062) can be mounted to enable additional functions such as remote control or status indication.

Mounting and installation

The RCD is mounted on a DIN rail, with the slider-hand operation enabling tool-free installation and removal. The 4-pole configuration requires correct assignment of conductors (L1, L2, L3, N), with the N conductor positioned on the left. Installation must comply with applicable standards and regulations, particularly VDE 0100 and DIN VDE 0664. The use of suitable busbars and covers (e.g. 5SW3005 or 5SW3008) ensures proper and safe installation.

Advantages in operation

The circuit breaker offers high reliability through integrated safety functions such as encircling and shock protection. Tool-free mounting and removal reduces effort during installation and maintenance. Compatibility with the SENTRON system kit enables flexible expansion of functionality without impairing the basic function. The use of the DataMatrix code provides quick access to technical information, making maintenance and documentation more efficient.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/369487
qrcode für Siemens 5SV3344-6KL RCD Switch 4-pole 30mA