Further information for Siemens 5SV3342-6KL RCD 25A 3+N-pole
General
Degree of protection
Type A
Nominal current
25 A
Earth fault trip current
30 mA
Operating voltage
400 V AC
Number of poles
4
N-conductor position
Left
Built-in width
4 TE
Protection function
residual current protection
Tripping characteristic
fast
Actuation
slider manual operation
Data matrix code
The Siemens residual current circuit breaker type 5SV3342-6KL is a 4-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It features a rated current of 25 A and a residual current trip value of 30 mA, with the N conductor positioned on the left. The device is designed for operating voltages up to 400 V AC and is suitable for installation in distribution boards within the field of electrical installation technology. The Type A protection class enables detection of alternating and direct current residual currents, which is particularly relevant for installations with electronic devices or converters.
Applications
The RCD is used in electrical distribution systems where reliable protection against dangerous residual currents is required. It is suitable for residential and commercial buildings, as well as in installations with increased protection requirements, such as bathrooms, kitchens, or industrial environments. The 4-pole configuration ensures disconnection of all conductors, including the neutral conductor, in the event of a fault, enabling complete disconnection of the power supply.
Functions and Equipment in Detail
The switch features an integrated encircling and shock protection, enabling safe installation and maintenance. The slider-hand operation allows tool-free removal of the device from the DIN rail or busbar system, simplifying installation and replacement procedures. A data matrix code on the device provides access to technical data via the Siemens Industry Online Support app, facilitating maintenance and documentation.
Technology Explained Simply
The circuit breaker operates on the principle of residual current detection: when there is a difference between incoming and outgoing current (residual current), the switch trips within milliseconds. Type A detects both alternating and direct current residual currents, making it suitable for modern electronic loads. The rated voltage of 400 V AC covers typical network supplies in Europe. The 4-pole configuration ensures that all phases and the neutral conductor are disconnected, guaranteeing complete disconnection of the power supply.
Compatibility and Accessories
The switch is part of the SENTRON system and can be extended with various accessories. These include, for example, auxiliary switches, fault signal switches, load switches, undervoltage release units, as well as various busbars and covers. Compatibility with accessories such as the pin busbar 5ST3783-0KL or the remote actuator 5ST3073-0MC allows flexible adaptation to specific requirements. The mounting width is 4 TE, enabling installation in standard distribution boards.
Mounting and Installation
The RCD is mounted on a DIN rail, with the slider-hand operation enabling tool-free insertion and removal. The left-side positioning of the N conductor is standard and conforms to common installation guidelines. Installation takes place in distribution boards, with the mounting width of 4 TE to be considered. The use of appropriate busbars and covers ensures proper and safe installation.
Advantages in Operation
The circuit breaker offers high reliability through integrated residual current detection and fast tripping time. Tool-free mounting and dismounting accelerates maintenance and replacement work. Compatibility with an extensive accessory system enables flexible expansion of functions, such as remote control or status indication. Integrated data matrix technology simplifies technical documentation and maintenance.