Further information for Siemens 5SV3311-6KK12 residual current circuit breaker 30 mA
General
Degree of protection
Type A
Nominal operating current
16 A
Earth fault trip current
30 mA
Nominal voltage
230 V
Voltage type
AC
Number of poles
2
Model
SIGRES
Pitch units
2 TE
Protection function
residual current protection
Actuation
slider manual operation
Cable grip and touch protection
Data matrix code
The Siemens residual current circuit breaker type 5SV3311-6KK12 is a 2-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It is intended for use in electrical installations with a nominal voltage of 230 V AC and provides a nominal operating current of 16 A. The circuit breaker detects fault currents from 30 mA and automatically trips to prevent an electrical accident. It is designed as type A, meaning it can also detect pulsating direct current fault currents, such as those from electronic devices or LED lighting.
Residual current circuit breaker with integrated encircling and shock protection ensures additional safety during installation. The switches are designed to fully encircle the DIN rail, thus preventing accidental contact with live parts. The slider-hand operation allows the switch to be removed from or inserted into the busbar system without tools, simplifying installation and maintenance.
SIGRES is a special version intended for difficult environmental conditions and allows for an extended test interval. This is particularly relevant in installations with high stress or in industrial environments, where the reliability of the circuit breaker must be ensured over longer periods. The integrated data matrix code labeling on the device enables quick access to all technical data via the Siemens Industry Online Support App, facilitating maintenance and documentation.
Compatibility and accessories allow the circuit breaker to be expanded with various modules from the SENTRON system building kit. These include, for example, auxiliary switches, fault signal switches, adapters for other switch types, pin busbars in various versions (e.g. 10 mm² or 16 mm², 2-phase, 4-phase) as well as terminal covers. These accessories can be integrated according to application and circuit diagram to enable additional functions such as signal transmission, remote control, or improved cable connection.
Mounting and installation take place in standard installation enclosures on the 35 mm DIN rail. The tool-free removal and mounting via slider-hand operation reduces installation time and increases work safety. The switches are suitable for use in indoor and outdoor installations, with environmental conditions being addressed by the SIGRES version. The switches are designed for operation in electrical installations with a frequency of 50/60 Hz.
Operational advantages include high reliability, easy handling, and expandability. The integrated safety through encircling and shock protection, as well as type A detection for pulsating direct currents, enhances the protective function. The use of pin busbars and adapters enables flexible integration into existing control systems. The data matrix code technology supports digital documentation and maintenance, which is particularly beneficial in industrial installations.
The circuit breaker is designed for use in electrical installations with a nominal voltage of 230 V AC and complies with applicable standards for residual current circuit breakers. The switches are available in the 2TE (2 division units) version, enabling placement in enclosures with standardized dimensions. The switches are designed for operation in environments with increased stress, with the SIGRES version specifically intended for difficult environmental conditions.