Further information for Siemens 5SV3311-6 RCD Switch 16A
General
Degree of protection
Earth leakage switch
Nominal current
16 A
Earth fault trip current
30 mA
Operating voltage
230 V AC
Number of poles
2 way
Construction length
2 TE
Protection function
encircling and touch protection
Actuation
slider manual operation
Data matrix code
The Siemens residual current circuit breaker type 5SV3311-6 is a 2-pole RCD of the SENTRON series, designed for the protection of persons and property against electric shock. It features a rated current of 16 A and a residual current tripping value of 30 mA, with an operating voltage of AC 230 V. The switch is designed as type A, meaning it can detect and interrupt both alternating and direct current residual currents. It is designed for use in 1+N-pole installations and has a mounting width of 2 TE (modular units), making it suitable for standard installations in distribution boards.
Applications
The RCD is used in electrical installations where there is a high need for protection against dangerous residual currents. This includes, for example, residential buildings, commercial enterprises, industrial plants, as well as installations with high humidity or water exposure, such as bathrooms, kitchens, or outdoor areas. The use in 1+N-pole circuits enables the safe protection of consumers with a protective earth connection. The type A design is particularly suitable for installations with electronic devices that may generate direct current residual currents.
Functions and Equipment in Detail
The switch provides standard creepage and shock protection, ensuring safe mounting and maintenance. The slider-hand operation allows for tool-free removal of the device from the DIN rail or busbar system, simplifying installation and maintenance. A data matrix code is affixed to the device, enabling quick access to all technical data via the Siemens Industry Online Support app. This supports maintenance and documentation during operation.
Technology Explained Simply
The residual current circuit breaker continuously monitors the current flow in the wiring system. If a difference of at least 30 mA is detected between the current in the live and neutral conductors (residual current), the switch trips within fractions of a second to prevent danger. The type A design also detects pulsating direct current residual currents, making it suitable for modern electronic devices. The rated voltage of 230 V AC covers typical household and commercial applications.
Compatibility and Accessories
The switch is part of the SENTRON system and can be extended with various accessories. These include, for example, pin busbars such as the 5ST3734 (10 mm², 2-phase) or the 5ST3770-2 (10 mm², 4-phase, cuttable), enabling safe power distribution. Other components such as auxiliary switches (e.g. 5ST3062), fault signal switches (e.g. 5ST3020), or adapters (e.g. 5ST38206) can be used to extend functionality. Compatibility with the system building kit allows flexible adaptation to different requirements.
Mounting and Installation
The switch is mounted on a DIN rail, with the slider-hand operation facilitating tool-free insertion and removal. Installation takes place in a distribution board, with the mounting width of 2 TE allowing placement in standard installations. The use of pin busbars or other accessories requires selecting the appropriate components from the SENTRON system.
Advantages in Operation
The RCD provides reliable protection through the combination of high protection level and easy handling. The integrated protection against creepage and shock increases safety during installation. Quick access to technical data via the data matrix code supports maintenance and documentation. Compatibility with a wide range of accessories enables flexible expansion of functions according to requirements.