| General |
| Degree of protection | Type A |
| Rated tripping current | 30 mA |
| Switching power | 6 kA |
| Nominal current | 6 A |
| Operating voltage | 230 V AC |
| Characteristic | B |
| Mounting height | 70 mm |
| Certification | DIN EN 61009-1, DIN EN 61009-2-1 |
| Terminal type | Double chamber terminals |
| System | SENTRON |
| Type of device | Earth leakage circuit breaker |
The Siemens FI/LS switch type 5SU1356-6KK06 is a combined protective switch for use in electrical distributions, providing protection against overload, short circuit, and fault currents. It belongs to the SENTRON series and is designed as an RCBO (Residual Current Breaker with Overcurrent protection). The device is intended for installation in distribution boards and offers protection against dangerous fault currents with a rated tripping current of 30 mA. The Type A protection class enables detection of pulsating fault currents, which is particularly relevant for devices with electronic power supplies. The rated current is 6 A, and the breaking capacity is 6 kA, ensuring high safety under short-circuit loads. The operating voltage is 230 V AC, and the device is designed for use in 1P+N installations.
Residual current circuit breaker with integrated line protection offers a compact solution for protecting consumers and installations. The double-chamber terminals allow for easy and secure connection of conductors with different cross-sections, reducing installation time and increasing connection reliability. The terminals are designed to ensure a secure connection even with different wire cross-sections. The switches are VDE-tested and certified according to DIN EN 61009-1 and DIN EN 61009-2-1, confirming compliance with European safety standards for residual current circuit breakers.
Technology explained clearly – The switch operates on the principle of residual current protection, detecting a differential current between the incoming and return conductors. When a difference of 30 mA is detected, the switch trips to prevent electrical hazards. The B-characteristic ensures selective tripping during overloads, with the tripping time depending on the current level. The breaking capacity of 6 kA means the switch can safely disconnect even under high short-circuit currents without damage.
Compatibility and accessories – The device is part of the SENTRON system and can be extended with various accessories. These include auxiliary switches, fault signal switches, remote actuators, under-voltage release units, and pin busbars from the 5ST3 series. The pin busbars enable quick and secure connection of multiple protective switches within a distribution board. Additionally, fire protection switch blocks or handle locking devices can be mounted to enhance safety and functionality. The use of accessories follows the system building block principle, enabling modular expansion.
Installation and mounting – The FI/LS switch is designed for mounting height T=70 mm and can be installed in standard distribution boards. Mounting is done via integrated terminals and designated fixing points. The double-chamber terminals simplify the connection of conductors with different cross-sections. Installation is typically carried out by qualified professionals in accordance with applicable regulations and standards. The connection terminals are designed to ensure a secure and durable connection.
Operational advantages – The switch provides reliable protection for people and installations. The combination of residual current and line protection in a single device reduces space requirements in the distribution board and simplifies planning. Certification according to DIN EN 61009-1 and DIN EN 61009-2-1 ensures compliance with safety requirements. The integrated Data Matrix Code function allows quick access to technical data via the Siemens Industry Online Support App, facilitating maintenance and documentation. Modular expandability through accessories increases flexibility in adapting to specific requirements.
Protection class and
Type A are key features for use in installations with electronic devices, as they detect pulsating fault currents. The
B-characteristic ensures precise tripping during overloads, with tripping time dependent on current level. The
breaking capacity of 6 kA ensures safe operation even under high short-circuit currents. The
operating voltage of 230 V AC is standard for typical low-voltage supply in Germany and Europe. The
rated current of 6 A is suitable for smaller consumers and installations with lower power requirements.
The SENTRON series from Siemens offers high reliability and is widely used in electrical installations. The combination of functionality, safety, and modularity makes the FI/LS switch 5SU1356-6KK06 a suitable solution for use in residential and commercial buildings as well as industrial applications, where reliable protection against electrical hazards is required.