Further information for Siemens 5SU13547KK10 RCD 10A
General
Degree of protection
Type A
Fault current protection
30 mA
Nominal voltage
230 V
Nominal current
10 A
Short-circuit withstand capability
10 kA
Switching type
1P+N
Characteristic
C
Certification
DIN EN 61009-1, DIN EN 61009-2-1
Terminal type
Double chamber terminals
System
SENTRON
Built-in width
70 mm
Accessory compatibility
Pin busbars 5ST3, auxiliary power switch, undervoltage release, remote control, fault signal switch, load current release, fire protection switch blocks, auxiliary switches, locking devices, spacers, terminal covers
Data matrix code
The Siemens FI/LS switch type 5SU1354-7KK10 is a combined protection switch for use in electrical installations, providing protection against overload, short circuit, and earth leakage currents. It belongs to the SENTRON series and is designed for installation in modular electrical enclosures. The device is rated for a nominal voltage of 230 V AC and offers protection against earth leakage currents starting at 30 mA. The Type A protection class enables detection of pulsating leakage currents, which is particularly relevant for devices with electronic controls. The C characteristic ensures an appropriate response to load fluctuations and prevents unnecessary tripping during short-term current surges. The nominal current is 10 A, and the switch is rated for a short-circuit current of 10 kA, making it suitable for use in residential and commercial electrical installations.
Applications
The FI/LS switch is used in electrical distributions where combined protection against overload, short circuit, and earth leakage currents is required. It is particularly suitable for installations operating electronic devices that generate pulsating leakage currents, such as in apartments, office buildings, or small production facilities. The Type A protection class also makes it suitable for applications with non-sinusoidal leakage currents, which can occur with modern electronic devices.
Functions and Features in Detail
The switch features double-chamber terminals, which facilitate the connection of conductors with different cross-sections. This allows for flexible and secure connections, even when connecting conductors of varying cable cross-sections. The terminals are designed to ensure a secure connection and prevent conductor twisting. The switches are VDE-tested and certified according to DIN EN 61009-1 and DIN EN 61009-2-1, confirming compliance with applicable safety standards for residual current circuit breakers.
Technology Explained Simply
The FI/LS switch combines the functions of a circuit breaker (LS) and a residual current circuit breaker (FI). The LS protects against overload and short circuit by automatically tripping when the current exceeds the rated value. The FI protection detects leakage currents indicating insulation faults or contact with earth, and disconnects the circuit within milliseconds to prevent injury. The C characteristic means the switch does not unnecessarily trip during short-term current surges, such as those occurring during motor start-up or other inductive loads. The Type A protection class also detects pulsating leakage currents, which can occur in devices with rectifiers or frequency converters.
Compatibility and Accessories
The switch is part of the SENTRON system and can be extended with various accessories. These include auxiliary switches, under-voltage release units, remote control actuators, fault signal switches, load current release units, fire protection switch blocks, auxiliary switches, locking devices, pin busbars, and spacers. The pin busbars 5ST3 enable quick and secure connection with other SENTRON devices. Accessories can be added according to the specific requirements of the installation to achieve additional functions such as remote control, signaling, or under-voltage protection.
Installation and Mounting
The switch is designed for installation in modular electrical enclosures with a depth of 70 mm. Mounting is carried out in standard distribution boxes, where the double-chamber terminals allow for easy and secure connection of conductors. The connection terminals are suitable for various conductor cross-sections, increasing flexibility during installation. Installation must comply with applicable regulations and standards, ensuring correct polarity and secure conductor connections.
t Operational Advantages
The FI/LS switch provides reliable combined protection, enhancing safety in electrical installations. The C characteristic prevents unnecessary tripping during short-term current surges, while the Type A protection class also detects pulsating leakage currents. The double-chamber terminals simplify installation and ensure secure connections. Certification according to DIN EN 61009-1 and DIN EN 61009-2-1 confirms compliance with safety requirements. Integration into the SENTRON system allows flexible expansion with various accessories to meet specific application requirements.
Data Matrix Code
A data matrix code is located on the device, enabling quick access to all technical data and documentation via the Siemens Industry Online Support app. This facilitates maintenance and servicing of the device.
System Building Kit
The SENTRON protective switches can be extended with a wide range of accessories from the system building kit, enabling customized adaptation to the specific requirements of each installation.
Protection Class and Standards
The switch is VDE-tested and certified according to DIN EN 61009-1 and DIN EN 61009-2-1. These standards define requirements for residual current circuit breakers, including electrical and mechanical properties, testing procedures, and safety requirements.
Pin Busbars
Connection to other SENTRON devices is achieved via pin busbars 5ST3, enabling quick and secure connections. The pin busbars are available in various versions, including 10 mm² and 16 mm², with different connection options such as 2-phase, 3x(2-phase+HS/FS), or 2x2-pole shock-protected. The pin busbars can also be supplied fully insulated or cuttable, depending on requirements.
Accessories
Available accessories include auxiliary switches, under-voltage release units, remote control actuators, fault signal switches, load current release units, fire protection switch blocks, auxiliary switches, locking devices, pin busbars, spacers, and terminal cover caps. These accessories can be added according to the specific requirements of the installation to achieve additional functions.
System Integration
The switch is part of the SENTRON system and can be extended with various accessories. Integration into the system enables flexible and modular adaptation to the specific requirements of each installation. The use of pin busbars 5ST3 enables quick and secure connection with other SENTRON devices.
Safety
The FI/LS switch provides reliable combined protection, enhancing safety in electrical installations. The C characteristic prevents unnecessary tripping during short-term current surges, while the Type A protection class also detects pulsating leakage currents. The double-chamber terminals simplify installation and ensure secure connections. Certification according to DIN EN 61009-1 and DIN EN 61009-2-1 confirms compliance with safety requirements.
Maintenance and Service
Maintenance of the device is carried out in accordance with applicable regulations. The data matrix code on the device enables quick access to all technical data and documentation via the Siemens Industry Online Support app, facilitating maintenance and service.
Application Areas
The switch is suitable for use in apartments, office buildings, small production facilities, and other installations where combined protection against overload, short circuit, and earth leakage currents is required. The Type A protection class makes it particularly suitable for installations with electronic devices that generate pulsating leakage currents.