Further information for Siemens 5ST3898 stud busbar 10 mm² 3-phase
General
Cross section
10 mm²
Connection configuration
3-phase, 6x (1PH+HS)
Built-in width
8,5 TE
System
SENTRON
Number of connection points
6
Connection type
Pin
Application
Residual current devices, circuit breakers
Touch protection
The pin busbar 5ST3898 from Siemens is an add-on module for residual current protective devices and circuit breakers in the SENTRON system. It serves as a connection element for the safe and structured distribution of electrical lines in enclosures and is used in electrical installations for connecting switches and fuses. The busbar is designed for use in low-voltage installations and enables a compact, shock-protected mounting in enclosures with fixed length.
Applications
The pin busbar 5ST3898 is specifically designed for use in enclosures with power switches and residual current protective devices. It is used in industrial electrical installations, building technology, and distribution enclosures where safe and reliable power distribution is required. The construction allows for parallel connection of up to six units, with each connection point designed for a phase (1P) as well as an auxiliary or residual current contact (HS/FS). The 3-phase configuration makes it particularly suitable for three-phase distribution systems.
Functions and Equipment in Detail
The busbar features a cross-sectional area of 10 mm² and is designed for a 3-phase connection configuration. It provides six connection points, with each point including a phase connection (1P) and an additional connection for auxiliary or residual current contacts (HS/FS). Shock protection is standard, enhancing safety during installation and maintenance. The fixed length of 158 mm allows for precise placement in the enclosure, while the mounting width of 8.5 TE (module units) ensures compatibility with standard switchboards.
Technology Explained Simply
The pin busbar operates on the principle of parallel power distribution: electrical energy is routed via the busbar to multiple connected switches or fuses. The pins ensure a secure mechanical and electrical contact. Shock protection is achieved by covering the conductive parts, preventing direct contact with live parts during installation or maintenance. The 10 mm² cross-sectional area is suitable for typical loads in low-voltage installations and ensures sufficient current transmission with minimal resistance.
Compatibility and Accessories
The pin busbar 5ST3898 is designed as an add-on component for residual current protective devices and circuit breakers in the SENTRON system from Siemens. It is universally mountable and can be combined with other SENTRON modules. Compatible accessories include, for example, pin busbars with other cross-sections (e.g. 16 mm²), connection terminals (e.g. 5ST3768), and series connectors (e.g. 5ST3793-0, 5ST3793-2). These components enable a flexible and modular construction of enclosures.
Mounting and Installation
Mounting is performed in standard switchboards with a mounting width of 8.5 TE. The fixed length of 158 mm requires appropriate placement within the enclosure. Connections are made via pins, which are directly inserted into the designated contacts of switches or fuses. The integrated shock protection simplifies installation, as no additional covers or protective measures are required. The busbar is designed for easy and comfortable mounting, with connection security ensured by the mechanical locking of the pins.
Advantages in Operation
The pin busbar 5ST3898 provides reliable power distribution with high contact quality. The integrated shock protection increases safety during installation and maintenance. The modular design allows for flexible expansion of the enclosure system. Use within the SENTRON system ensures high compatibility with other Siemens components, simplifying planning and installation. The fixed length and defined mounting width ensure precise positioning within the enclosure.