Siemens 5ST3881, EAN: 4047624581436

Siemens 5ST3881 stud busbar 10 mm² single-phase

Siemens 5ST3881 stud busbar 10 mm² single-phase

Lieske Part No. 2035951
Mfg Part No 5ST3881
EAN-Code 4047624581436
Manufacturer Siemens
Here only 17,88 EUR
21,28 EUR incl. VAT

Further information for Siemens 5ST3881 stud busbar 10 mm² single-phase

General
Cross-sectional area10 mm²
Number of connection points6 x
Construction size6TE -
Connection type1P -
Modeltouch-safe -
SystemSENTRON -
ManufacturerSiemens -
The pin busbar 5ST3881 from Siemens is an add-on module for residual current protective devices and circuit breakers in the SENTRON system. It serves as a single-phase busbar with a cross-section of 10 mm² and is designed for mounting in enclosures and distributors. The size corresponds to standard 6TE, with a fixed length of 105 mm enabling precise placement in predefined mounting fields. The busbar is equipped with a shock-protected connection, enhancing safety during installation and maintenance by protecting conductive parts from unintended contact.

Pin busbar refers here to a vertical or horizontal conductor plate that enables multiple electrical connections via pins. This design is particularly common in enclosures, where multiple switches or fuses are connected to a common power supply. The single-phase configuration means the busbar is designed for supplying a single phase, which is typical in single-phase installations. The shock-protected design meets electrical safety requirements, especially in systems operated by skilled personnel.

The busbar is designed as an add-on component to be integrated into existing SENTRON systems. It is universally mountable and can be installed without special tools. Installation is done by simply inserting it into the designated mounting sockets of enclosure modules. The fixed length of 105 mm ensures an exact fit in standard distributor modules and prevents unintended shifting or misalignment.

Connection 1P describes the electrical connection for one phase, with the busbar providing six connection points (6x). This allows parallel supply to up to six switches or fuses. The 10 mm² cross-section is designed for a maximum current load of up to 100 A, depending on the specific application and environmental conditions. The busbar is designed for use in enclosures, where stable and secure power distribution is required.

The compatibility of the pin busbar 5ST3881 is limited to the SENTRON system from Siemens. It can be combined with other components of the system, such as residual current protective devices or circuit breakers. Suitable accessories include additional pin busbars in various configurations (e.g. 16 mm², 3-phase), connection terminals (e.g. 5ST3768-4, 5ST3768-5) and cable entries (e.g. 5ST3768-3). Installation requires no additional tools, with size 6TE enabling standard mounting in enclosures.

In operation, the busbar provides reliable power distribution with low resistance. The shock-protected design reduces the risk of electrical accidents, especially during maintenance work. The fixed length and universal mounting function simplify planning and installation in distributors. The busbar is suitable for use in industrial and commercial electrical installations, where secure and structured power distribution is required.

Technology explained clearly: The pin busbar functions as a central power distribution unit. The pins enable quick and secure connections to switches. The shock-protected cover protects against direct contact with conductive parts. The 10 mm² cross-section ensures sufficient current transmission with minimal voltage drop. The fixed length of 105 mm fits exactly into the designated mounting fields of SENTRON modules.

Compatibility and accessories: The busbar is specifically developed for the SENTRON system. It can be combined with other SENTRON components such as residual current protective devices, circuit breakers, and additional pin busbars. Suitable accessories include connection terminals (e.g. 5ST3768-4, 5ST3768-5) and cable entries (e.g. 5ST3768-3). Installation is done in size 6TE, enabling use in standard distributors.

Mounting and installation: The busbar is inserted into the designated mounting sockets of enclosure modules. The fixed length of 105 mm ensures a precise fit. The shock-protected design simplifies installation, as no additional covers are required. Installation requires no special tools, with the pins directly inserted into the connection sockets of the switches.

Operational advantages: The busbar provides safe and reliable power distribution. The shock-protected design reduces the risk of electrical accidents. The universal mounting function and fixed length simplify planning and installation. Compatibility with the SENTRON system ensures uniform and structured system design.

The pin busbar 5ST3881 is a standard component of SENTRON distributors and is used as an add-on component for residual current protective devices and circuit breakers. The technical features meet the requirements of industrial electrical installations, with safety and reliability being the primary focus.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035951
qrcode für Siemens 5ST3881 stud busbar 10 mm² single-phase