Further information for Siemens 5ST3824 stud busbar 3-phase 10 mm²
General
Product type
pin busbar
Manufacturer
Siemens
Connection cross section
10 mm²
Connection configuration
1x FI 3P+N + 8x LS 1P
Number of phases
3
System
SENTRON
Touch protection
The pin busbar 5ST3824 from Siemens is an add-on module for residual current protective devices and circuit breakers in the SENTRON system. It serves as a fixed, 12-TE-wide connection component for safe and structured power distribution in low-voltage installations. The busbar is designed for use in enclosures, where multiple switches or fuses are connected to a common power supply point. The construction enables a shock-protected installation, ensuring safety during installation and maintenance.
Applications
The pin busbar 5ST3824 is used in electrical distribution systems, particularly in enclosures for low-voltage installations. It is intended as an add-on component for residual current protective devices (RCD) and circuit breakers (CB). The 3-phase design with one RCD connection (3P+N) and eight CB connections (1P) enables parallel supply of multiple switching devices. The fixed length of 212 mm fits standard switchboards and is designed for use in 12-TE width.
Functions and Features in Detail
The busbar features a 10 mm² connection cross-section, designed for sufficient current transmission under typical loads in low-voltage installations. The connections are implemented as pin connections, ensuring a secure and mechanically stable connection. The construction is designed to be shock-protected, preventing accidents caused by unintended contact with conductive parts. The universal mounting capability allows flexible integration into existing enclosure configurations.
Technology Explained Simply
The pin busbar 5ST3824 is part of Siemens' SENTRON system, which is based on standardized modules. The 12-TE width corresponds to a standard module size in enclosures, allowing the component to be directly installed into existing switchboards. The 3-phase design with one RCD connection (3P+N) and eight CB connections (1P) enables supply to one residual current protective device and eight circuit breakers. Shock protection is achieved through a closed cover of the conductive parts, which are only accessible when the front panel is open.
Compatibility and Accessories
The pin busbar 5ST3824 is compatible with other SENTRON modules and can be combined with various accessories, such as connection terminals (e.g. 5ST3768-5, 5ST3768-4), series connectors (e.g. 5ST3793-1, 5ST3793-2), or other pin busbars (e.g. 5ST3854, 5ST3624). These components allow flexible adaptation to different switchgear configurations. The use of suitable cables and connection terminals is required to ensure safe and reliable power distribution.
Mounting and Installation
Mounting takes place in a 12-TE-free area of the enclosure. The busbar is secured using screws or integrated brackets. Connections are made via pin connections to the corresponding switches or fuses. Shock protection requires that the enclosure front panel remains closed to protect the conductive parts. Installation can be done without additional tools, provided the necessary mounting elements are available.
Operational Advantages
The pin busbar 5ST3824 provides structured and safe power distribution in low-voltage installations. The shock-protected design reduces the risk of electrical accidents. The universal mounting capability and compatibility with other SENTRON modules simplify planning and installation of switchgear. The fixed length of 212 mm and 12-TE width fit standard configurations, enabling quick and reliable installation. The 10 mm² connection cross-section size is suitable for typical loads in industrial and commercial installations.