Further information for Siemens 5ST3770-4 stud busbar 4-phase cuttable
General
Cross section
10 mm²
Number of TE
16
Number of phases
4
Assignment
FI 4P N right and 6 LS 1P+N
Compatibility
Residual current devices, circuit breakers
Cuttable
Touch protection
End caps
The Siemens pin busbar type 5ST3770-4 is a 4-phase, cuttable busbar for use in meter enclosures and distributors. It is specifically designed for use with residual current devices (RCD) and circuit breakers (CB) and provides safe and reliable power distribution. The busbar has a cross-section of 10 mm² and is designed for 16 mounting units (TE), with the configuration consisting of one RCD 4P N on the right and six CB 1P+N. The integrated shock protection and included end caps increase safety during installation and operation.
Applications
The pin busbar 5ST3770-4 is used in electrical distribution systems, particularly in meter enclosures, where safe and structured power distribution is required. It is suitable for installations where residual current devices and circuit breakers are mounted, and allows flexible adaptation to different circuit diagram requirements. The cuttable design allows individual length adjustment according to the respective enclosure depth.
Functions and equipment in detail
The busbar is equipped with shock protection, which minimizes the risk of accidents caused by unintended contact with conductive parts. The end caps ensure proper end covering of the busbar, improving safety and visual appearance in the distributor. The configuration with one RCD 4P N on the right and six CB 1P+N enables clear assignment of protection functions and facilitates maintenance and inspection.
Technology explained simply
The pin busbar 5ST3770-4 is an electrical distribution component serving as power supply for multiple switches. The cross-section of 10 mm² ensures sufficient current-carrying capacity for typical distribution tasks. The 4-phase arrangement (3 phases + N) enables supply of three-phase loads as well as single-phase loads via the neutral conductor. The cuttable design allows precise adjustment to the respective enclosure depth, achieving optimal space utilization. The shock protection is an integrated safety feature that reduces the risk of electrical contact during installation or maintenance.
Compatibility and accessories
The pin busbar is compatible with residual current devices and circuit breakers. As accessories, various connection terminals (e.g. 5ST3768-5 and 5ST3768-4), series connectors (e.g. 5ST37933), shock protection caps (5ST3655), cable entries (5ST3768-3) as well as other pin busbars (e.g. 5ST3770-5, 5ST3970-5, 5ST3970-4) are available. These components enable flexible and expandable installation, with the mentioned items specifically designed for use with the 5ST3770-4 busbar.
Mounting and installation
Mounting is carried out in a distributor or meter enclosure. The cuttable construction allows adjustment of the length to the enclosure depth. The end caps are attached to the ends of the busbar to ensure safe end covering. The shock protection is already integrated and requires no additional measures. Connection to the switches is made via the designated pins, with the configuration (RCD 4P N on the right and 6 CB 1P+N) ensuring correct assignment.
Advantages in operation
The pin busbar 5ST3770-4 offers high safety through integrated shock protection and end caps. The cuttable design allows individual adaptation to different enclosure sizes. The clear configuration with RCD and CB facilitates maintenance and inspection. Compatibility with common protection switches and availability of suitable accessories increase the flexibility and expandability of the system. Use in meter enclosures ensures structured and safe power distribution.