Further information for Siemens 5ST3740 Busbar 3ph 10mm²
General
Product type
pin busbar
Number of phases
3
Cross section
10 mm²
Model
touch-safe
End caps
None
Series
SENTRON
Application range
Residual current devices, circuit breakers
Cuttable
The pin busbar 5ST3740 from Siemens is a shock-protected, 3-phase conductor with a cross-section of 10 mm² and a total length of 1016 mm. It serves as an accessory for residual current protective devices and circuit breakers in the field of electrical installation technology. The busbar is cuttable, allowing it to be adapted to the specific requirements of the installation. It is delivered without end caps, which makes the installation flexible and enables integration into existing switchgear.
Pin busbar is a special design in which the conductor pins are directly attached to the connection points of the switches or protective devices. This ensures a secure and reliable electrical connection. The shock-protected design protects during installation and maintenance against unintended contact with conductive parts, increasing workplace safety. The 3-phase configuration makes the busbar suitable for applications in three-phase networks, particularly in low-voltage installations.
The busbar is universally mountable and can be easily integrated into existing switchgear. Installation is carried out by direct connection to the terminal clamps of circuit breakers or residual current protective devices. The cuttable length of 1016 mm allows individual adaptation to the respective switchboard geometry. The 10 mm² cross-section is suitable for use in low-voltage installations with corresponding current ratings and ensures sufficient current transmission with minimal voltage drop.
Accessory for residual current protective devices and circuit breakers means that the busbar does not function as an independent switching device, but serves as a connecting element to link multiple switches or protective devices. This is common in distribution boards and enclosures where centralized power supply for multiple switching devices is required.
The busbar is part of the SENTRON series from Siemens, known for its reliability and standardization in electrical installation technology. The universal mounting capability and easy installation simplify work in the electrical trade. The shock-protected design complies with applicable safety requirements and reduces the risk of electrical accidents during installation.
In combination with other components such as terminal clamps (e.g. 5ST3768-4 or 5ST3768-5), series connectors (e.g. 5ST3793-0, 5ST3793-1, 5ST3793-2) or pin busbars with other cross-sections (e.g. 5ST3741, 5ST3742), the busbar can be flexibly used in complex switchgear. The use of series connectors enables parallel connection of multiple switches, making the switchgear structured and clear.
The busbar 5ST3740 is designed for use in low-voltage installations and is used in enclosures, distributors or other electrical installations where safe and reliable power distribution is required. The cuttable length and shock-protected design make it a flexible component in electrical installations.
The busbar is not an independent switching device, but a connecting element that establishes the electrical connection between multiple protective or switching devices. Use in combination with other SENTRON components ensures a uniform and safe installation.
The busbar is delivered without end caps, which makes the installation flexible.