Further information for Siemens 5ST3725-4 stud busbar 3p/N
General
Nominal cross section
10 mm²
Connection configuration
3p/N (RCD N on right)
Number of RCD connections
1 4-pole
Number of LS connections
4 1x 4-pole, 3x 2-pole
Construction type
Fixed
Compatibility
SENTRON 5ST3 system
Touch protection
The pin busbar 5ST3725-4 from Siemens is an accessory component for residual current protective devices and circuit breakers in the SENTRON 5ST3 system. It enables safe and structured distribution of electrical energy within enclosures and power distributors. The busbar is designed for a nominal cross-section of 10 mm² and allows the connection configuration 3p/N (FI N-right), with the N conductor positioned on the right for residual current protective devices. The construction is fixed and includes 14 TE (separation units), enabling standardized mounting in enclosures.
Applications
The pin busbar is used in industrial and commercial electrical installations where safe and clear power distribution is required. It is particularly suitable for installations with residual current protective devices (FI) and circuit breakers (LS), as it provides the necessary connection points for these components. The configuration with 1x FI 4-pole, 1x LS 4-pole, and 3x LS 2-pole allows flexible integration into existing control systems. The shock-protected design increases safety during installation and maintenance.
Functions and Equipment in Detail
The busbar is equipped with a standard shock protection, which protects the electrical contacts from unintended contact. This is especially important in environments with high personnel traffic or during maintenance work. The connection points are designed for easy and comfortable mounting. The fixed length of 14 TE ensures precise positioning within the enclosure and prevents unintended movement or displacement.
Technology Explained Simply
The pin busbar functions as a distributor for electrical conductors within an enclosure. The pins enable a secure and conductive connection to the connected components. The nominal cross-section of 10 mm² is designed for power transmission typical of industrial applications. The positioning of the N conductor on the right (FI N-right) meets the requirements for residual current protective devices, which require clear assignment of neutral conductors. Shock protection is achieved through integrated protective caps or plates that cover the conductive parts.
Compatibility and Accessories
The pin busbar 5ST3725-4 is universally mountable and compatible with other SENTRON 5ST3 components. Compatible accessories include feed-in terminals (e.g. 5ST3768 25 mm²), shock protection parts (e.g. 5ST3655 yellow), connection terminals (e.g. 5ST3768-4, 5ST3768-5), cable entries (e.g. 5ST3768-3), series connectors (e.g. 5ST37933 16 mm²), end caps (e.g. 5ST3766), and additional pin busbars (e.g. 5ST3625-4, 5ST3825). These components enable modular expansion and adaptation of the control system to specific requirements.
Mounting and Installation
Mounting is performed in an enclosure or power distributor, where the busbar is fastened to a mounting rail. The 14 TE construction fits standard enclosure modules. Connections are made via the pins to the corresponding components (FI and LS switches). The shock-protected design reduces the risk of electrical accidents during installation. Universal mountability allows flexible positioning within the system.
Advantages in Operation
The pin busbar provides clear and organized power distribution, simplifying maintenance and inspection of the system. The integrated shock protection increases safety for the operator and maintenance personnel. Compatibility with other SENTRON 5ST3 components ensures a modular and scalable system architecture. The fixed length and standardized TE construction ensure precise installation and prevent errors during mounting.