| General |
| Degree of protection | touch-safe |
| Cross section | 16 mm² |
| Number of phases | 3x(1-phase + HS) |
| Model | cuttable |
| Accessory compatibility | residual current protective devices, circuit breakers, connection terminals, series connectors, end caps |
The Siemens pin busbar type 5ST3714 is a shock-protected accessory for residual current devices and circuit breakers in industrial and commercial applications. It serves as an electrical connection element in enclosures and enables the safe and structured distribution of electrical power. The busbar is configured as 3x(1-phase + HS), where HS stands for auxiliary circuit, and thus provides the option to connect three separate circuits, each with one main and one auxiliary current connection. The total length is 1016 mm, and the busbar is cuttable to adapt it to individual requirements. The cross-sectional area is 16 mm², ensuring sufficient current-carrying capacity for typical applications in electrical installations.
Applications
The pin busbar 5ST3714 is used in enclosures, particularly in combination with residual current devices and circuit breakers from the SENTRON series. It serves as a connection and distribution element for electrical wiring and enables clear, organized, and safe cabling. Its universal mounting capability makes it compatible with various enclosure configurations and allows flexible integration into existing systems.
Functions and Equipment in Detail
The busbar is designed to be shock-protected, meaning that the conductive parts are protected by an insulating layer or mechanical cover to prevent accidents caused by unintended contact. This is especially important in environments where the busbar is accessible to skilled personnel or during maintenance work. The cuttable construction allows for individual length adjustment to optimally fit the available space in the enclosure.
Technology Explained Simply
The pin busbar is made of copper (Cu), ensuring high electrical conductivity and mechanical stability. The cross-sectional area of 16 mm² corresponds to a standard value for medium to high current loads in industrial facilities. The 3x(1-phase + HS) configuration means that three independent circuits, each with one main and one auxiliary current connection, are supported. This is useful, for example, to connect main lines and control lines in parallel. The busbar is fully insulated, increasing shock protection and minimizing the risk of short circuits or electric shock.
Compatibility and Accessories
The pin busbar 5ST3714 is designed as an accessory for residual current devices and circuit breakers. It is universally mountable and fits various SENTRON products. Available accessories include connection terminals (e.g. 5ST3768-5), series connectors (e.g. 5ST3793-2), end caps (e.g. 5ST3750), or other pin busbars in different configurations (e.g. 5ST3730, 5ST3700). These components can be combined according to requirements to realize complex control systems.
Mounting and Installation
Mounting is done by simply inserting into the designated mounting points in the enclosure. The cuttable length allows precise adaptation to the available space. The shock-protected design reduces risks during installation and maintenance. Connections to other components are made via the integrated pins, which are connected to appropriate connection terminals or series connectors.
Advantages in Operation
The shock-protected construction increases safety during operation and maintenance. The cuttable length and universal mounting capability enhance flexibility in planning and installation. Combination with other SENTRON components enables a consistent and reliable control system. The high electrical conductivity of copper ensures efficient power transmission with minimal losses.