Siemens 5ST3712, EAN: 4001869209326

Siemens 5ST3712 CU Busbar 1016 mm

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5ST3712 CU Busbar 1016 mm

Lieske Part No. 740316
Mfg Part No 5ST3712
EAN-Code 4001869209326
Manufacturer Siemens
Here only 101,70 EUR
121,02 EUR incl. VAT

Further information for Siemens 5ST3712 CU Busbar 1016 mm

General
Degree of protectiontouch-safe
Cross section16 mm²
Number of phases3
End capsNone
Protective conductorYes
CuttableYes
The Siemens pin busbar 5ST3712 is a shock-protected, cuttable conductor for use in electrical distributions. It serves as an accessory component for residual current protective devices and circuit breakers in the SENTRON system. The busbar is 1016 mm long and features a cross-sectional area of 16 mm². It is designed for a 3-phase application with an additional protective conductor (HS). The construction allows for universal mounting and easy connection to the respective devices. Due to the integrated shock protection, installation is safe and meets the requirements for electrical safety. The busbar is supplied without end caps, allowing it to be flexibly adapted to the specific installation.

Pin busbar is the designation for a metallic conductor bar used in electrical distributions as a collection point for multiple connections. The shock-protected design protects against unintended contact with conductive parts, which is particularly important in open distributions. The 3-phase configuration with HS (protective conductor) enables use in three-phase AC installations, as commonly found in industrial and commercial facilities. The length of 1016 mm is standardized but can be cut to size as needed to adapt to the specific enclosure configuration.

The busbar is used as an accessory component for residual current protective devices and circuit breakers. It is compatible with Siemens' SENTRON system and can be universally mounted in various enclosure configurations. Installation is performed by simply inserting the busbar into the designated holders of the switches or protective devices. The cuttable construction allows for individual length adjustment, enabling flexible use in different installation scenarios.

Compatible components include, for example, feed-in terminals 5ST3768 for 25 mm², series connectors 5ST3793-0 and 5ST3793-2 in various lengths and cross-sections, as well as pin busbars in various configurations. The busbar itself is supplied without end caps, allowing installation to be adapted to the specific enclosure configuration. The use of additional components such as shock protection 5ST3655 or connection terminals 5ST3768-4 enables a safe and reliable connection.

Mounting and installation are performed by inserting the busbar into the designated holders of the circuit breakers or residual current protective devices. The cuttable length of 1016 mm allows for individual adaptation to the specific enclosure depth. The shock-protected design ensures safe handling during installation. The busbar is designed for use in electrical distributions compatible with Siemens' SENTRON system.

Operational advantages include universal mounting capability, easy installation, and safe installation due to integrated shock protection. The cuttable length allows flexible adaptation to different enclosure configurations. Use in combination with other SENTRON components ensures a consistent and reliable electrical distribution. The busbar is suitable for use in industrial and commercial facilities where safe and reliable power distribution is required.

The busbar is made of copper (Cu), ensuring high electrical conductivity and mechanical stability. The cross-sectional area of 16 mm² allows sufficient current transmission for typical applications in distributions. The 3-phase configuration with HS is designed for use in three-phase AC installations, common in industry and commerce. The length of 1016 mm is standardized but can be cut as needed to adapt to the specific installation. The busbar is supplied without end caps, allowing it to be flexibly adapted to the specific enclosure configuration. Installation is performed by simply inserting the busbar into the designated holders of the switches or protective devices. The cuttable construction allows for individual length adjustment, enabling flexible use in different installation scenarios. The use of additional components such as shock protection 5ST3655 or connection terminals 5ST3768-4 enables a safe and reliable connection. The busbar is designed for use in electrical distributions compatible with Siemens' SENTRON system. The universal mounting capability, easy installation, and integrated shock protection ensure a safe and reliable installation. The cuttable length allows flexible adaptation to different enclosure configurations. Use in combination with other SENTRON components ensures a consistent and reliable electrical distribution. The busbar is suitable for use in industrial and commercial facilities where safe and reliable power distribution is required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/740316
qrcode für Siemens 5ST3712 CU Busbar 1016 mm