Siemens 5ST3706, EAN: 4001869209272

Siemens 5ST3706 CU busbar 2ph fully insulated

Industrial Material > Enclosures / Chassis > Profile, hat, copper busbars

Siemens 5ST3706 CU busbar 2ph fully insulated

Lieske Part No. 250758
Mfg Part No 5ST3706
EAN-Code 4001869209272
Manufacturer Siemens
Here only 16,29 EUR
19,39 EUR incl. VAT

Further information for Siemens 5ST3706 CU busbar 2ph fully insulated

General
Cross section16 mm²
Number of phases2
InsulationFully isolated
End capsWith
Protective conductorYes
CuttableYes
Touch protectionYes
The Siemens pin busbar 5ST3706 is a shock-protected, fully insulated conductor plate for use in enclosures and distributions. It serves as an accessory for residual current protective devices and circuit breakers, enabling safe and structured power distribution within control systems. The busbar is designed for use in industrial and commercial electrical installations where high safety and reliability in power distribution are required.

Applications

The pin busbar 5ST3706 is primarily used in enclosures where multiple protective switches or fuses are connected to a common power supply. It is particularly suitable for applications requiring a 2-phase power supply with an additional protective conductor (HS). The cuttable length of 214 mm allows flexible adaptation to different enclosure sizes and mounting conditions. The complete insulation and integrated shock protection ensure safe operation, even during open installation.

Functions and Equipment in Detail

The busbar features a cross-sectional area of 16 mm², ensuring sufficient current-carrying capacity for typical control systems. The construction with two phases and a protective conductor (2ph + HS) meets the requirements of modern distribution systems. The end caps are pre-installed and ensure that the ends of the busbar are covered and thus shock-protected. The busbar is cuttable, allowing it to be individually trimmed to the required length without compromising electrical safety.

Technology Explained Simply

The term pin busbar describes a conductor plate connected to protective switches or other components via pins. The fully insulated design means the entire busbar, including the pins, is surrounded by insulating material to prevent short circuits and contact hazards. The shock-protected construction is essential for complying with safety standards in electrical installations. The cuttable feature allows precise adaptation to the specific enclosure configuration, achieving optimal space utilization.

Compatibility and Accessories

The pin busbar 5ST3706 is designed as an accessory for residual current protective devices and circuit breakers. It is universally mountable and can be easily integrated into existing control systems. Suitable accessories include, for example, cable entries (e.g. 5ST3768-3), connection terminals (e.g. 5ST3768-4, 5ST3768-5), as well as other pin busbars in different lengths and cross-sections (e.g. 5ST3707, 5ST3736). These components can be used to expand or adapt distribution systems. The end cap for pin busbars (5ST3750) is also available to cover the ends of the busbar if the pre-installed end caps are removed.

Mounting and Installation

Installation is done by simply inserting the pins into the corresponding connection points of the protective switches or fuses. The busbar can be mounted on profile, hat, or Cu rails, with the exact mounting method depending on the specific enclosure construction. The cuttable length of 214 mm allows individual adjustment, with the cut edges requiring careful finishing after cutting to ensure a clean and safe connection. The pre-installed end caps already provide a shock-protected termination before installation.

Advantages in Operation

The shock-protected and fully insulated design of the pin busbar 5ST3706 significantly reduces the risk of accidents and short circuits. The simple mounting and universal mounting capability facilitate installation and maintenance. The cuttable length allows flexible adaptation to different enclosure sizes, avoiding material waste and optimizing space utilization. Its use as an accessory for residual current protective devices and circuit breakers ensures reliable power distribution in complex control systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/250758
qrcode für Siemens 5ST3706 CU busbar 2ph fully insulated