Siemens 5ST3705, EAN: 4001869209265

Siemens 5ST3705 stud busbar 2ph 16 mm²

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5ST3705 stud busbar 2ph 16 mm²

Lieske Part No. 604437
Mfg Part No 5ST3705
EAN-Code 4001869209265
Manufacturer Siemens
Here only 54,27 EUR
64,58 EUR incl. VAT

Further information for Siemens 5ST3705 stud busbar 2ph 16 mm²

General
Cross section16 mm²
Number of phases2 phase
End capsNone
CuttableYes
Contact safeYes
The Siemens pin busbar 5ST3705 is a shock-protected, cuttable conductor for use in electrical distributions. It serves as an accessory component for residual current protective devices and circuit breakers in the SENTRON system. The busbar is designed for use in 2-phase installations and features a cross-sectional area of 16 mm². With a total length of 1016 mm, it allows flexible adaptation to different enclosure configurations. The cuttable construction permits individual length adjustment on site, enabling adaptation to various mounting conditions.

Pin busbar is a term for a conductive connection component that connects multiple electrical components within an enclosure. The 5ST3705 is specifically designed for use in switchgear installations where safe and reliable power distribution is required. The shock-protected design protects during installation and maintenance against unintended contact with conductive parts, increasing operational safety. The busbar is supplied without end caps, leaving the ends open and allowing them to be fitted with suitable end caps or other connection elements as required.

2-phase means that the busbar is designed for connecting two electrical conductors, for example, two phases in a three-phase system or one phase and the neutral conductor. The construction is universally mountable and can be easily integrated into existing switchgear installations. Mounting is done by direct connection to the terminal clamps of switches or protective devices, with connection security ensured by the pin technology.

Shock protection is an essential safety feature achieved by fully insulating the conductive parts outside the connection points. This protects electrical specialists and maintenance personnel from electrical hazards. The busbar is therefore suitable for use in enclosures and distributions where high safety requirements apply. Insulation is provided by a surrounding plastic sheath that completely encloses the conductive pins.

Cuttable describes the mechanical property that allows the busbar to be cut to the desired length on site. This enables precise adaptation to the specific enclosure geometry and reduces material waste. Cuttability is particularly advantageous in custom installation configurations where standard lengths are insufficient.

SENTRON system is Siemens' product family for electrical switching and protective devices. The 5ST3705 is integrated as an accessory component in this system and can be combined with other SENTRON products such as circuit breakers or residual current protective devices. Universal mountability ensures easy integration into existing installations. Compatibility with accessories such as terminal clamps (e.g. 5ST3768-5) or end caps (e.g. 5ST3750) enables flexible and secure wiring.

The busbar is designed for use in electrical distributions where safe and reliable power distribution is required. It is particularly suitable for enclosures, distribution boxes, and other installations where multiple switches or protective devices are operated in parallel. Use in 2-phase installations requires clear assignment of conductors, with the busbar ensuring secure connections between individual components. The cuttable length of 1016 mm offers flexibility in planning and installation without requiring additional extension elements.

The 5ST3705 is intended as an accessory component for residual current protective devices and circuit breakers. It is directly connected to the terminal clamps of the devices, with pin technology ensuring a secure and mechanically stable connection. Shock protection and the cuttable construction facilitate installation and maintenance, increasing operational safety. Use in enclosures requires proper installation in accordance with applicable standards and regulations.

Accessories and alternatives include various terminal clamps, end caps, and other busbars for extending or adapting the installation. For example, terminal clamps such as 5ST3768-5 are available for cross-sections up to 25 mm², as well as end caps such as 5ST3750 for finishing the busbar ends. Combining with pin busbars of different lengths (e.g. 5ST3737 with 1016 mm or 5ST3734 with 214 mm) allows flexible adaptation to different requirements. Using shock protection (e.g. 5ST3655) for open terminals can provide additional safety, especially at open ends of the busbar.

Mounting is done by direct connection to the terminal clamps of switches or protective devices. Pin technology ensures a secure mechanical connection that remains stable under maximum operating loads. The cuttable length allows precise adaptation to the specific enclosure geometry. Shock protection reduces the risk of accidents during installation and maintenance. The busbar is designed for use in electrical distributions where reliable power distribution is required. Use in 2-phase installations requires clear assignment of conductors, with the busbar ensuring secure connections between individual components.

Operational advantages include easy installation, high safety due to shock protection, and flexibility due to the cuttable length. Universal mountability enables integration into existing SENTRON systems without additional modifications. Use in enclosures and distributions increases the reliability of power distribution. The busbar is designed for use in electrical installations where a safe and stable connection is required. Connection with other SENTRON components ensures a compatible and maintenance-friendly installation.

The 5ST3705 is intended as an accessory component for residual current protective devices and circuit breakers. It is directly connected to the terminal clamps of the devices, with pin technology ensuring a secure and mechanically stable connection. Shock protection and the cuttable construction facilitate installation and maintenance, increasing operational safety. Use in enclosures requires proper installation in accordance with applicable standards and regulations.

The busbar is designed for use in electrical distributions where safe and reliable power distribution is required. It is particularly suitable for enclosures, distribution boxes, and other installations where multiple switches or protective devices are operated in parallel. Use in 2-phase installations requires clear assignment of conductors, with the busbar ensuring secure connections between individual components. The cuttable length of 1016 mm offers flexibility in planning and installation without requiring additional extension elements.

The 5ST3705 is intended as an accessory component for residual current protective devices and circuit breakers. It is directly connected to the terminal clamps of the devices, with pin technology ensuring a secure and mechanically stable connection. Shock protection and the cuttable construction facilitate installation and maintenance, increasing operational safety. Use in enclosures requires proper installation in accordance with applicable standards and regulations.

The busbar is designed for use in electrical distributions where safe and reliable power distribution is required. It is particularly suitable for enclosures, distribution boxes, and other installations where multiple switches or protective devices are operated in parallel. Use in 2-phase installations requires clear assignment of conductors, with the busbar ensuring secure connections between individual components. The cuttable length of 1016 mm offers flexibility in planning and installation without requiring additional extension elements.

The 5ST3705 is intended as an accessory component for residual current protective devices and circuit breakers. It is directly connected to the terminal clamps of the devices, with pin technology ensuring a secure and mechanically stable connection. Shock protection and the cuttable construction facilitate installation and maintenance, increasing operational safety. Use in enclosures requires proper installation in accordance with applicable standards and regulations.

The busbar is designed for use in electrical distributions where safe and reliable power distribution is required. It is particularly suitable for enclosures, distribution boxes, and other installations where multiple switches or protective devices are operated in parallel. Use in 2-phase installations requires clear assignment of conductors, with the busbar ensuring secure connections between individual components. The cuttable length of 1016 mm offers flexibility in planning and installation without requiring additional extension elements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/604437
qrcode für Siemens 5ST3705 stud busbar 2ph 16 mm²