Siemens 5ST3703, EAN: 4001869209241

Siemens 5ST3703 Terminal Bar 16 mm²

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5ST3703 Terminal Bar 16 mm²

Lieske Part No. 274812
Mfg Part No 5ST3703
EAN-Code 4001869209241
Manufacturer Siemens
Here only 26,46 EUR
31,49 EUR incl. VAT

Further information for Siemens 5ST3703 Terminal Bar 16 mm²

General
Degree of protectiontouch-safe
Cross section16 mm²
Application1-phase + HS
CuttableYes
The Siemens pin busbar type 5ST3703 is a shock-protected conductor for use in electrical distribution systems. It serves as an accessory component for residual current protective devices and circuit breakers in the SENTRON system. The busbar is 1016 mm long, cuttable, and features a cross-sectional area of 16 mm². It is designed for single-phase applications with an auxiliary circuit (HS), making it suitable for connecting multiple switching devices within a distribution board. The construction ensures safe operation, as exposed conductor points are covered by integrated shock protection. This minimizes the risk of accidents during installation and maintenance. The busbar is universally mountable and can be easily integrated into existing installations. Mounting is achieved by direct connection to the corresponding switching devices, and the busbar is supplied without end caps.

Applications

The pin busbar 5ST3703 is used in electrical distribution systems, particularly in low-voltage distribution boards, where safe and reliable power distribution is required. It is suitable for applications in industrial, commercial, and residential buildings, where multiple switching devices must be connected via a common conductor. The busbar supports the installation of residual current protective devices and circuit breakers, making it an integral part of modern electrical distribution systems.

Functions and Equipment in Detail

The busbar features a shock-protected design that covers exposed conductor points, thereby increasing safety during installation. The length of 1016 mm allows flexible adaptation to different distribution board sizes, and the busbar is cuttable to adjust to the desired length. The cross-sectional area of 16 mm² ensures sufficient current-carrying capacity for typical applications in electrical installations. The busbar is designed for single-phase applications with an auxiliary circuit (HS), enabling the connection of switching devices with additional functions such as signaling or remote control.

Technology Explained Simply

The pin busbar 5ST3703 is a metallic conductor that functions as a power distribution element within a distribution board. The term pin busbar refers to the shape of the connection pins, which are inserted into the corresponding sockets of switching devices. Shock protection is achieved through insulating coverage of the conductor points, minimizing the risk of short circuits or electrical contact. The busbar is made of copper, ensuring high electrical conductivity and mechanical stability. The cuttable length of 1016 mm allows individual adaptation to the specific distribution board configuration.

Compatibility and Accessories

The pin busbar 5ST3703 is compatible with other components of the Siemens SENTRON system, particularly residual current protective devices and circuit breakers. It can be combined with various accessories, such as connection terminals (e.g. 5ST3768-4, 5ST3768-5), end caps (e.g. 5ST3766, 5ST3748), or other pin busbars (e.g. 5ST3700, 5ST3701, 5ST3713). These components enable flexible and safe installation in different distribution board configurations.

Mounting and Installation

Mounting of the pin busbar is achieved by direct connection to the socket terminals of switching devices. The busbar is inserted into the designated sockets of switches or protective devices, with shock protection ensured by the integrated covering. The cuttable length of 1016 mm allows adaptation to the specific distribution board size. Installation requires no additional tools, except for a suitable cutting tool if the busbar needs to be shortened. The busbar is designed for use in low-voltage distribution boards and can be integrated into existing systems.

Operational Advantages

The pin busbar 5ST3703 provides reliable and safe power distribution in electrical distribution systems. The shock-protected design reduces the risk of accidents during installation and maintenance. The cuttable length allows flexible adaptation to different distribution board sizes, making planning and mounting more efficient. Compatibility with other SENTRON components ensures uniform and standardized installation. The busbar is designed for single-phase applications with an auxiliary circuit, enabling integration of additional functions such as signaling or remote control.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/274812
qrcode für Siemens 5ST3703 Terminal Bar 16 mm²