Further information for Siemens 5ST3652 stud busbar 16 mm² 4x3-phase
General
Product type
pin busbar
Cable cross-section
16 mm²
Connection configuration
3x 4-phase
Compatibility
residual current devices, circuit breakers SENTRON
Manufacturer
Siemens
Touch protection
The pin busbar 5ST3652 from Siemens is an accessory for residual current devices and circuit breakers of the SENTRON series. It enables safe and efficient connection of multiple electrical conductors in an enclosure or distribution unit. The busbar is designed for a cross-section of 16 mm² and allows a 3-way 4-phase connection configuration, making it suitable for parallel supply of multiple consumers or switching devices. The integrated shock protection ensures a high safety standard during installation and maintenance, as exposed conductor points are covered by a protective housing.
Applications
The pin busbar 5ST3652 is used in electrical distribution systems, particularly in enclosures, where multiple conductors must be connected at a single point. It is universally mountable and can be installed on residual current devices and circuit breakers of the SENTRON series. The application is in industrial and commercial electrical installations, where reliable and safe power distribution is required. The 4-phase configuration (3 phases + neutral conductor) makes it especially suitable for 3-phase networks with neutral conductor.
Functions and Equipment in Detail
The busbar features standard shock protection, which covers the exposed connection points and thus minimizes the risk of accidents due to electrical contact. The design allows for easy and comfortable installation as well as a secure electrical connection. The 3-way configuration enables simultaneous connection of three separate circuits, each with a 4-phase connection (3 phases + N). The connection terminals are designed for a cable cross-section of 16 mm², enabling high current loading.
Technology Explained Simply
The pin busbar functions as a mechanical and electrical connection point between multiple conductors. The pins ensure a secure electrical contact, while the shock protection enhances operational safety. The 4-phase connection configuration (3 phases + neutral conductor) is typical for 3-phase AC systems in industry and commerce. The busbar is designed for maximum current loading, determined by the cable cross-section of 16 mm². The shock protection complies with applicable safety standards and protects against unintended contact with conductive parts.
Compatibility and Accessories
The pin busbar 5ST3652 is specifically designed for use with residual current devices and circuit breakers of the SENTRON series from Siemens. Compatible accessories include feed-in terminals (e.g. 5ST3768), series connectors (e.g. 5ST37933), additional pin busbars (e.g. 5ST3622, 5ST3822, 5ST3852), and shock protection caps (e.g. 5ST3655). These components can be used to extend or adapt the distribution unit. Combining with other 5ST3 components enables modular and flexible system design.
Installation and Mounting
Mounting is done by simply inserting into the designated mounting openings of the switching devices. The busbar is secured at the corresponding connection points of the residual current devices or circuit breakers. Cables are connected to the pins, with the shock protection covering the exposed parts. Installation requires no special tools or additional components, as the busbar is directly integrated into the devices. The universal mounting capability facilitates integration into existing systems.
Operational Advantages
The pin busbar 5ST3652 provides reliable and safe power distribution in electrical installations. The integrated shock protection increases safety during installation and maintenance. The 3-way 4-phase configuration enables flexible and scalable system design. Compatibility with SENTRON devices ensures uniform and standardized installation. Easy mounting and secure electrical contact reduce installation time and increase operational safety.