| General |
| Product type | pin busbar |
| Cross section | 16 mm² |
| Connection configuration | 2x (2-phase + HS/FS) |
| Degree of protection | touch-safe |
| Compatibility | SENTRON 5ST3 system |
| Manufacturer | Siemens |
The pin busbar 5ST3640 from Siemens is an add-on module for residual current protective devices and circuit breakers in the SENTRON 5ST3 system. It enables safe and structured distribution of electrical lines in distribution boards and meter enclosures, allowing connection of two 2-phase lines as well as one auxiliary or residual current protective line (HS/FS). The component is specifically designed for use in electrical distribution systems where reliable and shock-protected power distribution is required.
Applications
The pin busbar 5ST3640 is used in electrical distribution systems, particularly in meter enclosures and distribution boards, where multiple protective switches or residual current protective devices must be connected to a common line. It is suitable for applications in residential and commercial buildings where safe and orderly power distribution across multiple phases and auxiliary lines is necessary. The shock-protected design makes it especially suitable for installations where protection against electrical hazards is a priority.
Functions and Features in Detail
The busbar has a cross-section of 16 mm² and is designed for the connection configuration 2x (2-phase + HS/FS). This means it can accommodate two separate 2-phase circuits as well as an additional auxiliary or residual current protective line (HS/FS). The shock-protected design ensures that exposed terminal connections cannot be accidentally touched, increasing safety during installation and maintenance. The construction is universally mountable, allowing flexible integration into existing SENTRON 5ST3 systems.
Technology Explained Simply
The pin busbar functions as a mechanical and electrical connection point between multiple switching devices. The pins enable a direct, secure connection to the terminal connections of the switches. The 16 mm² cross-section is designed for maximum current load, sufficient for typical distribution systems in buildings. The shock-protected design meets electrical safety requirements, especially in areas where personnel may come close to conductors during installation or maintenance.
Compatibility and Accessories
The pin busbar 5ST3640 is designed as an add-on component for the SENTRON 5ST3 system and is compatible with other components of this system, such as residual current protective devices and circuit breakers. Suitable accessories include, for example, shock protection 5ST3655 for free connections, terminal connectors 5ST3768-4 and 5ST3768-5 for 25 mm², as well as other pin busbars such as 5ST3886, 5ST3890, 5ST3840, and 5ST3610, which can be used depending on the requirements for line distribution. Combining these components enables a modular and adaptable distribution solution.
Mounting and Installation
Mounting is simple and convenient directly into the distribution board or meter enclosure. The busbar is inserted into the corresponding module of the SENTRON 5ST3 system and connected to the switches. The shock-protected design simplifies installation, as no additional protective measures are required. The universal mounting capability allows flexible positioning within the enclosure.
Operational Advantages
The pin busbar 5ST3640 provides reliable and safe power distribution in electrical distribution systems. The shock-protected construction reduces the risk of electrical hazards. The universal mounting capability and compatibility with the SENTRON 5ST3 system enable flexible and modular system design. The clear structuring of connections facilitates maintenance and fault diagnosis.