Siemens 5ST3615, EAN: 4001869318325

Siemens 5ST3615 Terminal Bar 10 mm²

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Siemens 5ST3615 Terminal Bar 10 mm²

Lieske Part No. 256370
Mfg Part No 5ST3615
EAN-Code 4001869318325
Manufacturer Siemens
Here only 9,54 EUR
11,35 EUR incl. VAT

Further information for Siemens 5ST3615 Terminal Bar 10 mm²

General
Cross-sectional area10 mm²
Connection configuration4x 3-phase
CompatibilityResidual current devices, circuit breakers
SystemSENTRON
Mountableuniversal
Touch protectionYes
The Siemens pin busbar 5ST3615 is an add-on module for residual current protective devices and circuit breakers in the SENTRON system. It is designed for the safe and efficient distribution of electrical energy within low-voltage distribution systems. The busbar is specifically designed for use in modular devices and enables parallel connection of multiple devices via standardized pin contacts. With a cross-sectional area of 10 mm² and a connection configuration of 4x 3-phase, it is designed for operation in three-phase AC networks. The touch-protected design ensures a high safety standard during installation and maintenance, as conductive parts are shielded by a protective cover against unintended contact.

Pin busbar
The pin busbar 5ST3615 is designed as a modular component for integration into existing switchgear systems. It is mounted in modular devices and enables electrical connection of multiple switches or fuses via a common connection point. The 4x 3-phase connection configuration meets the requirements of typical distribution systems, where three conductors (L1, L2, L3) are connected per phase. The busbar is designed for maximum current load, determined by the cross-sectional area of 10 mm², and is suitable for applications in low-voltage distribution.

Functions and equipment in detail
The busbar features an integrated touch protection, which shields the conductive parts of the pins from direct contact. This increases safety during installation and maintenance and meets the requirements for electrical safety in distribution systems. The connection points are designed to ensure a secure and reliable connection to the corresponding terminals or connection terminals. The universal mounting capability allows installation in various SENTRON devices, increasing flexibility in system design.

Technology explained simply
The pin busbar functions as an electrical distributor, connecting multiple devices via a common connection point. The pins are designed to be inserted into the corresponding sockets of switches or fuses. The 10 mm² cross-sectional area ensures sufficient current-carrying capacity, which is adequate for most applications in low-voltage distribution. The touch-protected design means that conductive parts are not freely accessible, minimizing the risk of short circuits or electric shocks.

Compatibility and accessories
The pin busbar 5ST3615 is intended as an add-on component for residual current protective devices and circuit breakers in the SENTRON system. It is universally mountable and can be combined with various accessories, such as series connectors (e.g. 5ST3793-0, 5ST3793-1, 5ST3793-2) or connection terminals (e.g. 5ST3768-3, 5ST3768-4, 5ST3768-5). Other pin busbars such as 5ST3617, 5ST3645, 5ST3647, 5ST3845, 5ST3847, 5ST3895, 5ST3897 are also available in the SENTRON system and can be used depending on requirements. Compatibility with these components enables flexible and modular system design.

Mounting and installation
Mounting is carried out in modular devices, where the busbar is inserted into the designated mounting openings and secured. The connection points are connected to the corresponding terminals or connection terminals, with the touch-protected design making installation safer. The universal mounting capability allows easy integration into existing switchgear systems. The busbar is designed for use in low-voltage distribution systems and requires no special tools or additional components for installation.

A pin busbar is a component for electrical distribution, used in switchgear systems to connect multiple devices via a common connection point. The touch-protected design protects against unintended contact with conductive parts. The cross-sectional area of 10 mm² determines the current-carrying capacity. The connection configuration 4x 3-phase enables connection of four three-phase lines. The universal mounting capability allows installation in various SENTRON devices. Residual current protective devices and circuit breakers are the typical devices for which this busbar is used as an add-on component.

Advantages in operation
The pin busbar 5ST3615 offers a reliable and safe distribution solution for low-voltage systems. The touch-protected design reduces the risk of accidents during installation and maintenance. The modular construction allows flexible adaptation to different requirements. The universal mounting capability in SENTRON devices increases compatibility and simplifies system design. Simple mounting and wiring reduce installation time and costs. The busbar is suitable for use in industrial and commercial facilities where safe and reliable power distribution is required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/256370
qrcode für Siemens 5ST3615 Terminal Bar 10 mm²