Siemens 5ST3020, EAN: 4001869187433

Siemens 5ST3020 Fault Signal Switch 1 NO 1 NC

Installation > Modular devices / equipment installation > Circuit breaker

Siemens 5ST3020 Fault Signal Switch 1 NO 1 NC

Lieske Part No. 660379
Mfg Part No 5ST3020
EAN-Code 4001869187433
Manufacturer Siemens
Here only 36,90 EUR
43,91 EUR incl. VAT

Further information for Siemens 5ST3020 Fault Signal Switch 1 NO 1 NC

General
Degree of protectionstandard touch-safe
Number of contacts1 normally open contact (NO) + 1 normally closed contact (NC)
Compatibilityfor circuit breakers 5SL, 5SY, 5SP, FI/LS 5SU1, FI 5SV
Additional requirementfor 5SU1: handle connector 5ST3805-1 required
Mounting methodon the handle of the circuit breaker
The Siemens fault signal switch type 5ST3020 is an add-on module for circuit breakers of the series 5SL, 5SY, 5SP, FI/LS 5SU1 and FI 5SV. It serves for visual and/or electrical indication of the switching state of a circuit breaker, thereby facilitating the operation and maintenance of electrical installations. The switch features a closers and an openers, which switch accordingly when the main switch is operated. This function enables monitoring of the switch state (on or off) at another location, for example in an enclosure or control system. When used with the circuit breaker 5SU1, an additional handle connector 5ST3805-1 is required to establish the mechanical connection.

Applications

The fault signal switch 5ST3020 is used in electrical distributions where remote monitoring of the switching state is necessary. This includes industrial installations, building automation, emergency power supplies and safety systems, in which the state of a circuit breaker is relevant for operational safety or fault diagnosis. The universal mounting capability on various switch types increases flexibility in planning and installation.

Functions and equipment in detail

The switch is designed as an add-on component for residual current protective devices and circuit breakers. It is mounted directly on the handle of the respective switch and takes over the indication of the switching state. The integrated contacts (1 closer, 1 opener) enable the control of external signals, such as LEDs, relays or control devices. Mounting is simple and convenient, without requiring additional tools or special mounting aids. The shock protection class is standardly ensured, which increases safety during installation and maintenance.

Technology explained simply

The fault signal switch operates mechanically: when the main power switch is operated, the handle moves, which activates the fault signal switch via a mechanical connection. As a result, the integrated contacts switch accordingly – the closer closes when the main switch is turned on, and the opener opens. These signals can be transmitted to external devices to indicate the state of the switch or integrate it into a control logic. The use is exclusively in combination with the mentioned circuit breaker types.

Compatibility and accessories

The fault signal switch 5ST3020 is compatible with circuit breaker types 5SL, 5SY, 5SP, FI/LS 5SU1 and FI 5SV. When used with the 5SU1, the handle connector 5ST3805-1 is required. As accessories, additional fault signal switches such as 5ST3021-2 (2S) or 5ST3022-2 (2O) are available, which offer multiple contacts depending on requirements. Additionally, pin busbars such as 5ST3733, 5ST3646 or 5ST3741 can be used to connect multiple switches, enabling central signal transmission.

Mounting and installation

Mounting is done directly on the handle of the circuit breaker. The mechanical connection is established via the integrated holder, with the handle connector 5ST3805-1 needing to be additionally mounted for the 5SU1. The electrical connection of the contacts is made via the designated terminal clamps. Installation is done without additional tools and is easy to perform due to the standardized design. Shock protection is already integrated into the construction.

Advantages in operation

The use of the fault signal switch 5ST3020 enables quick monitoring of the state of circuit breakers, especially in complex installations where direct access to the switch is not possible. The indication via closers and openers can be integrated into control and monitoring systems, increasing operational safety. The universal mounting capability and easy installation reduce installation time and costs. The standard shock protection ensures safe handling during installation and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660379
qrcode für Siemens 5ST3020 Fault Signal Switch 1 NO 1 NC