The Siemens auxiliary switch type 5ST3015-2 is an add-on module for circuit breakers and residual current protective devices. It serves as an auxiliary switch with a test button and features two normally open contacts. The component is specifically designed for use with circuit breakers from the 5SL, 5SY, 5SP series, as well as plug-in switches 5TL1. Additionally, it is compatible with FI/LS switches from the 5SU1 series (excluding variants 5SU1.FP/FR) and FI switches from the 5SV series. When mounted on 5SU1 switches, the handle connector 5ST3805-1 is required to ensure a secure mechanical connection.
Auxiliary switch with integrated test button enables checking of switching functions during operation. The test button activates the contacts, allowing the function of the auxiliary switch to be directly verified without affecting the main current circuit. This is particularly important in installations where the reliability of switching functions must be ensured. The contact arrangement with two normally open contacts is designed for low power applications and is suitable for control and signaling applications where no high current loads occur.
Applications include integration into electrical distributions where additional signals or control functions are required. For example, the auxiliary switch can be used to transmit the status of a circuit breaker to a monitoring unit or a control room system. The universal mounting capability allows for flexible installation on various switch types within the SENTRON product family.
Functions and equipment in detail include the integrated test button, which enables simple functional testing, as well as the compact design, which facilitates installation in existing switchgear. The contacts are designed for low power applications, making them suitable for signal transmission and control applications. Shock protection is standard, enhancing safety during installation and maintenance.
Technology explained simply shows that the auxiliary switch operates as a mechanically coupled add-on component. It is directly mounted onto the main power switch and serves the function of transmitting the status of the main switch (on/off) via auxiliary contacts. The test button allows manual actuation of the contacts to test their function without influencing the main current circuit. The contact arrangement with two normally open contacts means that the contacts are open when the main switch is on and close when the main switch is off.
Compatibility and accessories include use with the mentioned switch types. Suitable accessories, such as pin busbars from the 5ST3 series, can be used to connect multiple auxiliary switches or integrate them into larger switchgear systems. Examples include the pin busbar 5ST3713 (16 mm², 3x1-phase + HS, 214 mm) or the 5ST3702 (fully insulated, 1-phase + HS, 16 mm², 215 mm). These enable structured and safe wiring.
Mounting and installation are performed by direct attachment to the designated mounting points on the main power switches. Mounting is simple and does not require special tools. The mechanical connection is achieved via integrated mounting elements. When used with 5SU1 switches, the handle connector 5ST3805-1 is required to ensure a secure mechanical connection. Installation typically requires no additional electrical wiring, as the contacts are directly connected to the switchgear.
Operational advantages include reliable signal transmission, simple functional testing via the test button, and universal mounting capability. Shock protection increases safety during maintenance. Compatibility with various switch types within the SENTRON family enables flexible use in different application scenarios.