Siemens 5SM23253, EAN: 4001869460659

Siemens 5SM2325-3 FI block 30 mA 230 V

Installation > Modular devices / equipment installation > RCD

Siemens 5SM2325-3 FI block 30 mA 230 V

Lieske Part No. 949857
Mfg Part No 5SM23253
EAN-Code 4001869460659
Manufacturer Siemens
Here only 537,30 EUR
639,39 EUR incl. VAT

Further information for Siemens 5SM2325-3 FI block 30 mA 230 V

General
Degree of protectionType F
Tripping characteristicShort-time delayed
Nominal current63 A
Earth fault trip current30 mA
Operating voltage230 V
Number of poles2
Compatibilityfor circuit breakers 5SY
The Siemens FI block type 5SM2325-3 is a 2-pole residual current circuit breaker, specifically designed for combination with circuit breakers of the 5SY series. It serves for personal, fire, and circuit protection in electrical installations and is used for row mounting. The FI block is designed as type F, meaning it has a short-time delayed tripping characteristic for fault currents, enabling selective disconnection in complex circuits. The rated current is 63 A, the residual current trip value is 30 mA, and the operating voltage is rated for AC 230 V. These values are typical for low-voltage installations and ensure reliable protection against low fault currents, such as those occurring due to insulation faults.

Applications

The FI block 5SM2325-3 is suitable for use in residential and commercial buildings where high safety standards for electrical installations are required. It is commonly used in enclosures or distribution boards, where it is combined with a circuit breaker to provide both overload and residual current protection. The short-time delayed tripping (type F) enables selective disconnection, so that in the event of a fault in a subordinate protection zone, the entire circuit is not switched off, but only the affected part. This is particularly important in installations with multiple protection levels to enhance supply reliability.

Functions and Equipment in Detail

The FI block can be combined tool-free with circuit breakers of the 5SY series by simply plugging it in. This significantly simplifies installation and maintenance. The combination is achieved via a mechanical interlock, ensuring a secure connection. The wide range of FI blocks and the extensive program of circuit breakers allow flexible adaptation to different requirements. The FI block is designed for use in 2-pole circuits, which typically applies to the protection of phase conductors and the neutral conductor in single-phase AC installations.

Technology Explained Simply

Type F means that the FI block does not trip immediately at a residual current of 30 mA, but after a short delay. This delay typically amounts to a few tenths of a second and serves selectivity in multi-level protection configurations. This prevents a fault in a subordinate area from triggering the upstream protection. The rated voltage of 230 V AC is the standard voltage for single-phase AC installations in Germany and Europe. The rated current of 63 A is suitable for circuits with medium to high load, for example, in apartments, small commercial enterprises, or machine installations.

Compatibility and Accessories

The FI block 5SM2325-3 is specifically developed for combination with circuit breakers of the 5SY series from Siemens. It is compatible with various models of the 5SY series, available in different versions. Additionally, various accessories such as remote operation adapters (e.g., 5ST3820-1 or 5ST3820-3) or other FI blocks (e.g., 5SM2325-0, 5SM2625-6) can be combined to meet specific requirements. The accessories are also tool-free to install, with all additional components being mounted on the right side of the device.

Mounting and Installation

Mounting is done by simply plugging the FI block into the corresponding circuit breaker of the 5SY series. No tools are required, and the mechanical interlock ensures a secure connection. Installation takes place in standard distribution enclosures or boxes designed for row-mounted devices. Positioning is typically done in the order of protection levels, with the FI block directly connected to the circuit breaker.

Advantages in Operation

The FI block 5SM2325-3 offers high safety through combined protection against overload and residual currents. The tool-free mounting and easy combinability with other components reduce installation time and costs. The short-time delayed tripping (type F) enables selective disconnection, increasing the availability of the electrical installation. Use in combination with circuit breakers of the 5SY series ensures high reliability and compatibility within the Siemens product range.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/949857
qrcode für Siemens 5SM2325-3 FI block 30 mA 230 V