| General |
| Degree of protection | B |
| Nominal voltage | 400 V |
| Rated short-circuit current | 6 kA |
| Number of poles | 3 |
| Nominal current | 13 A |
| Product series | 5SL6 |
| Mounting method | tool-free |
| Connection type | Rear busbar |
The circuit breaker
Siemens SENTRON 5SL6313-6 is a 3-pole protection switch for rated voltages up to 400 V and a rated short-circuit current of 6 kA. It provides safe short-circuit and overload protection in standard applications in residential and utility buildings. The device is designed in switching type
B, enabling selective tripping during overloads and short circuits, and features a rated current of
13 A. The 5SL6 series is designed for use in electrical distributions where reliable and fast response to fault conditions is required.
Applications
The circuit breaker is intended for use in indoor electrical installations, particularly in residential buildings, office buildings, and other utility buildings. It protects electrical lines and consumers from damage caused by overloads or short circuits. The 3-pole configuration makes it suitable for three-phase supply lines. Switching type B is typical for applications with normal load characteristics, such as lighting, heating, or small motors.
Functions and Equipment in Detail
The switch allows
tool-free mounting and dismounting, simplifying installation and maintenance in the distribution box. The incoming wiring is connected via a
rear-mounted busbar, ensuring quick and secure connection of supply lines. The front of the device features a handle enabling operation and position indication (on or off). The 5SL6 series offers a wide range of variants, including 1-, 2-, 3-, 4-pole, as well as 1+N and 3+N-pole versions, to meet different requirements.
Technology Explained Simply
Switching type
B means that the switch trips during an overload (e.g., due to a faulty consumer) according to a specific time characteristic – tripping after a longer time for minor overloads and faster for higher overloads. In the case of a short circuit (sudden, very high current surge), tripping occurs immediately. The rated voltage of
400 V covers typical voltages in low-voltage installations, and the rated short-circuit current of
6 kA ensures the switch trips safely even under high fault currents. The rated current of
13 A defines the maximum current the switch can carry continuously without tripping.
Compatibility and Accessories
The device is part of the SENTRON series and can be extended with various accessories. These include
auxiliary switches, such as the 5ST3062, which can be used as a changeover switch for auxiliary functions like signaling or control. Also compatible are
pin busbars such as the 5ST3740 or 5ST3614, enabling structured and secure connection of multiple switches. The
interlock device 5ST3807 can be used for additional safety to prevent operation of the switch. Other accessories such as
terminal covers (5ST3800) or
handle locks (5ST3806) support safety and functionality during operation.
Mounting and Installation
Mounting is tool-free in a suitable distribution box. The rear busbar enables easy and secure connection of supply lines. Positioning in the distribution box follows the sequence of switching functions, taking into account the number of poles and current rating. The physical size corresponds to the standard for modular devices, allowing the switch to be mounted in common distributors with appropriate TE spacing.
Advantages in Operation
The circuit breaker offers high reliability and easy handling. Tool-free mounting reduces installation time, and the rear busbar simplifies wiring. Switching type B ensures a balanced response to overloads, avoiding unnecessary tripping. Compatibility with a wide range of accessories allows flexible adaptation to specific requirements, such as signaling, remote control, or additional safety functions. The 5SL6 series is designed for use in electrical distributions where clear structure and safe functions are prioritized.