| General |
| Operating voltage | 230 V |
| Rated surge voltage | 6 kA |
| Number of poles | 1+N-pole |
| Rated current | C13 |
| Built-in width | 1 TE |
| Protection function | Short-circuit and overload protection |
| Mounting method | tool-free |
The circuit breaker
5SL6013-7 from Siemens belongs to the SENTRON series and is designed for safe short-circuit and overload protection in standard applications in residential and commercial buildings. The device is 1+N-pole and has a rated current of
C13, where the C characteristic indicates typical tripping behavior under overload conditions. The operating voltage is
230 V, and the rated impulse withstand voltage is
6 kA, ensuring protection against high short-circuit currents. The mounting width corresponds to
1 TE (module unit), enabling installation in standard distribution boxes. Tool-free mounting and removal significantly simplify installation and maintenance. Power input is via a rear-mounted busbar, simplifying wiring and enabling quick integration into existing installations.
Applications
The switch is intended for use in electrical installations in residential and commercial buildings, where reliable protection of circuits against overload and short-circuit is required. The 1+N-pole configuration is particularly suitable for applications requiring neutral conductor protection, such as single-phase AC systems with a neutral conductor. The protection functions are designed for standard installations that do not require special requirements regarding switching speed or specific protection functions.
Functions and Equipment in Detail
The circuit breaker
5SL6013-7 offers simple and safe operation. Tool-free mounting is achieved via an integrated clamping system, enabling quick and secure fixation in the distribution board. The rear busbar simplifies wiring for power input and reduces installation time. The protection functions are designed for use in electrical installations with an operating voltage of 230 V. The C13 characteristic defines the tripping behavior under overload conditions, with the switch tripping within one hour at 1.3 times the rated current. At higher currents, tripping occurs more rapidly.
Technology Explained Simply
The rated impulse withstand voltage of
6 kA means the switch can safely interrupt short-circuit currents up to this level without damage to the device or the installation. The 1+N-pole configuration protects both the phase conductor and the neutral conductor, which is required in certain installation configurations. The C13 characteristic is a standard curve suitable for general applications in residential and commercial buildings. Tool-free mounting reduces installation effort and enables quick integration into existing distribution boards.
Compatibility and Accessories
The switch is compatible with a wide range of accessories that can extend its functionality. These include, for example,
auxiliary switches, which enable additional switching functions such as signaling or remote control. Other components such as
spacers,
pin busbars,
remote actuators, or
interlock devices can be added depending on the application. The accessories are specifically developed for the SENTRON series and ensure safe and reliable integration. Combining the switch with accessories such as the
5ST3062-0MC auxiliary/fault signal switch or the
5ST3073-0MC remote actuator extends the device’s functionality, for example for remote monitoring or automated switching operations.
Mounting and Installation
Mounting is tool-free via the integrated clamping system, enabling secure fixation in the distribution board. The rear busbar simplifies wiring for power input and reduces installation time. The mounting width of
1 TE allows integration into standard distribution boxes. Installation follows standard procedures for modular devices, with electrical connections to be made in accordance with applicable standards and regulations. The switches are designed for use in electrical installations with an operating voltage of 230 V.
Operational Advantages
The circuit breaker
5SL6013-7 provides reliable protection against overloads and short-circuits. Tool-free mounting and removal reduce installation effort and enable quick maintenance. The rear busbar simplifies wiring and reduces installation time. The 1+N-pole configuration enables safe protection of circuits that include a neutral conductor. Compatibility with a wide range of accessories extends the device’s functionality and allows adaptation to specific requirements. The protection functions are designed for standard applications in residential and commercial buildings and ensure safe operation of the electrical installation.