| General |
| Degree of protection | UL489 |
| Nominal current | 1.6 A |
| Switching power | 10 kA |
| Number of poles | 1 way |
| Switching characteristic | C |
| Operating voltage | 277 V |
| Device family | SENTRON |
| Accessory compatibility | 5ST3663-0HG, 5ST3010-0HG, 5ST3020-0HG, 5ST3801, 5ST3663-2HG, 5ST3701-3HG, 5ST3808, 5ST3663-1HG, 5ST3030-0HG, 8WH8210-0AA35, 5ST2136, 8GB4561, 8GB4562, 5TG8240, 7LF9006, 5ST3803, 8GB4564, 5ST2135, 5SW3006, 5SW3005 |
The circuit breaker
5SJ4115-7HG42 from Siemens is a 1-pole fuse switch for use in electrical installations, particularly in industrial applications and infrastructure. It is certified according to UL489 and provides protection against overload and short circuit with a rated current of 1.6 A and a switching capacity of 10 kA. The switching characteristic
C ensures a balanced response to short-term current surges, typical for electrical consumers. The device is designed for operating voltages up to 277 V and serves as a central component in the SENTRON system for protecting circuits and installations.
Applications
This circuit breaker is designed for use in electrical distributions where reliable protection against overload and short circuit is required. It is particularly suitable for industrial plants, building installations, and infrastructure projects, where compliance with safety standards and avoidance of failures are prioritized. The UL489 certification makes it suitable for use in regions with corresponding requirements.
Functions and Equipment in Detail
The switch features a clear switching position indicator, visually showing the operating state (on, off, tripped). An integrated Datamatrix code on the front enables quick identification of all relevant device data, such as type, rated current, and certifications. The SENTRON device family is characterized by uniform accessories that are easy to install and can be replaced at any time. Standard features include an integrated encircling and shock protection, enhancing installation safety.
Technology Explained Simply
The switching characteristic
C means that the switch tolerates current overloads up to approximately 5 times the rated current (here 8 A) for a short period, to avoid false tripping due to short-term current surges, such as those occurring during motor startup or with other devices. However, it trips quickly in case of higher, sustained overloads or short circuits. The rated voltage of 277 V is typical for three-phase networks in the USA and other regions, where the voltage between phase and neutral conductor is 277 V. The switching capacity of 10 kA describes the maximum energy the switch can safely interrupt without damage.
Compatibility and Accessories
The circuit breaker is part of the SENTRON family and can be combined with various accessories specifically developed for this series. These include pin busbars such as 5ST3663-0HG or 5ST3663-2HG, enabling simple and secure wiring. Additionally, auxiliary switches (e.g. 5ST3010-0HG), fault signal switches (e.g. 5ST3020-0HG), and locking devices (e.g. 5ST3801) are available to extend functionality and safety. The devices are designed for mounting in modular installation systems, with the rear-mounted busbar enabling easy alignment and wiring.
Mounting and Installation
Mounting is carried out in standard distribution boxes or rails, with the rear busbar enabling quick and secure connection of the circuits. Replacing a defective or replacement device is tool-free, as the devices can simply be pulled out of the busbar. The uniformity of accessories ensures high flexibility during installation and maintenance.
Advantages in Operation
Operation of the circuit breaker is characterized by reliability and ease of use. The clear indication of switching status and the Datamatrix code simplify maintenance and identification. The integrated protection functions ensure safe and stable power supply, guaranteeing protection for personnel and equipment. Integration into the SENTRON system enables modular expansion of the installation using standardized components.