Siemens 3VA99880AA22, EAN: 4042949000051

Siemens 3VA9988-0AA22 auxiliary switch changeover contacts HQ 7 mm

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Siemens 3VA9988-0AA22 auxiliary switch changeover contacts HQ 7 mm

Lieske Part No. 1585882
Mfg Part No 3VA99880AA22
EAN-Code 4042949000051
Manufacturer Siemens
Here only 43,11 EUR
51,30 EUR incl. VAT

Further information for Siemens 3VA9988-0AA22 auxiliary switch changeover contacts HQ 7 mm

General
Switch typeLeading auxiliary switch
Contact typeChangeover contacts
Contact configurationType HQ
Contact length7 mm
Compatibility3VA1, 3VA20-26 SENTRON compact circuit breaker
The product is an auxiliary switch from manufacturer Siemens, type 3VA9988-0AA22, specifically designed as accessory for the SENTRON compact circuit breakers of series 3VA1 as well as 3VA20 to 3VA26. It serves as an auxiliary contact that transmits the switching position of the main circuit breaker to convey signals in control and monitoring systems. The term leading means that the contact changes its state before the main contact is fully closed or opened, which is important for precise and reliable signal transmission in industrial installations.

Auxiliary switch are common in electrical engineering to transmit the state of a circuit breaker (e.g. switched on, switched off) to other devices or control systems. This switch is equipped with changeover contacts, meaning a contact that switches from one terminal to another during movement – typical for applications where a signal must be transmitted both during closing and opening.

Type HQ denotes the specific contact design, featuring a contact length of 7 mm. This design is intended for mounting in the specified SENTRON circuit breakers and ensures a secure mechanical connection as well as reliable electrical conduction. The contacts are designed to function reliably in industrial environments with high mechanical and electrical loads.

Accessory for SENTRON compact circuit breakers means that this auxiliary switch is not used as a standalone device, but as an addition to the specified breaker models. It is directly installed into the breaker housing to extend the signal transmission function. Compatibility is limited to series 3VA1, 3VA20, 3VA21, 3VA22, 3VA23, 3VA24, 3VA25, and 3VA26, enabling clear assignment to respective main devices.

Installation is performed by inserting the switch into the corresponding breaker housing, establishing the mechanical connection via designated connection points. The electrical connection is made through the contacts, which are integrated into the control unit or another device. The function is purely mechanical and electrical, without additional electronic control elements.

In industrial applications, the leading auxiliary switch enables precise state monitoring, for example in automation systems, where the exact switching behavior of the circuit breaker is critical for control logic. The use of changeover contacts allows detection of both the switching process and the return, which is advantageous for safety and monitoring systems.

The switch is part of the SENTRON 3VA system, designed as a unified system for various applications. Integration into existing installations occurs without additional modifications, as mechanical and electrical interfaces are standardized. The use is intended for all applications requiring signal transmission based on the state of the circuit breaker.

Leading auxiliary switch is thus a specific component used in combination with the mentioned circuit breakers to extend control functionality. The contact type changeover contact and the design Type HQ (7 mm) are crucial for correct function and mechanical fit.

The technical design is intended for industrial use, with mechanical robustness and contact reliability being primary. Signal transmission occurs purely mechanically, without electronic aids, increasing reliability in critical installations. Use is exclusively in conjunction with the specified circuit breakers, with installation into the housing and no additional components or tools required.

SENTRON compact circuit breakers are widely used in industrial electrical engineering, and accessories like this auxiliary switch extend their functionality. Integration into existing systems occurs without additional modifications, as interfaces are standardized. The use is intended for all applications requiring signal transmission based on the state of the circuit breaker.

The function of the auxiliary switch is purely mechanical and electrical, without additional electronic control elements. Installation is performed by inserting into the corresponding breaker housing, establishing the mechanical connection via designated connection points. The electrical connection is made through the contacts, which are integrated into the control unit or another device.

Changeover contacts enable detection of both the switching process and the return, which is advantageous for safety and monitoring systems. The contact length of 7 mm is designed for mounting in the specified breakers and ensures a secure mechanical connection.

The switch is part of the SENTRON 3VA system, designed as a unified system for various applications. Integration into existing installations occurs without additional modifications, as mechanical and electrical interfaces are standardized. The use is intended for all applications requiring signal transmission based on the state of the circuit breaker.

The technical design is intended for industrial use, with mechanical robustness and contact reliability being primary. Signal transmission occurs purely mechanically, without electronic aids, increasing reliability in critical installations. Use is exclusively in conjunction with the specified circuit breakers, with installation into the housing and no additional components or tools required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1585882
qrcode für Siemens 3VA9988-0AA22 auxiliary switch changeover contacts HQ 7 mm